Skip to content

How Much Is a Ton of Gravel?

A ton of bulk gravel costs $10 to $50 (HomeGuide, as of December 2025)[src] Source: HomeGuide before delivery; enter your quote below.

How do you know the amount?

Example size. Enter yours.

Your supplier's quote.

At published national prices

$53–$263

Cubic yards
3.7 yd³
Tons
5.25 tons
At HomeGuide range (December 2025)
$53–$263

At the published national price ranges, 5.25 tons of gravel costs about $53 to $263. Enter your supplier's price per ton for your own total.

Prices vary by region, season and supplier. Published ranges are for comparison only.

Estimate only — confirm quantities with your supplier before ordering.

More options: fees and extra

Delivery or minimum charges.

Added to the amount before pricing.

How much is a ton of gravel compared with a yard? HomeGuide lists bulk gravel at $10 to $50 per ton[src] Source: HomeGuide, or $15 to $75 per cubic yard[src] Source: HomeGuide, because a cubic yard weighs more than a ton. Prices vary by region and type, so use these to check quotes, not as your price.

The calculator opens with an example driveway and shows what it would cost at the published ranges. Type your supplier’s price per ton or per cubic yard to get your total. Delivery or minimum-order charges go under More options. The calculator converts between tons and cubic yards with the typical weight of dry gravel.

Key facts

How we calculate

Formula

Cubic yards = length (ft) × width (ft) × depth (in) ÷ 12 ÷ 27

Tons = cubic yards × weight per cubic yard (lb) ÷ 2,000

Cost = tons (or cubic yards) × your price + fees

Assumptions and defaults

  • Your price drives the total. The site never assumes a price for your area.
  • Tons use the typical weight of dry, loose gravel: 2,835 pounds[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing per cubic yard (Rockland, inside the U.S. Army range). Wet or very fine gravel weighs more, so a supplier’s scale may show more tons for the same volume.

  • The comparison lines multiply your amount by the low and high ends of $10 to $50 per ton (HomeGuide, as of December 2025)[src] Source: HomeGuide and $15 to $75 per cubic yard[src] Source: HomeGuide.

  • Prices on this page are checked every quarter and dated wherever they appear.

How much is gravel per ton?

Gravel costs $10 to $50 per ton (HomeGuide, as of December 2025)[src] Source: HomeGuide in bulk, before delivery. That retail range is what homeowners and small contractors pay a supply yard. A second, very different number comes from the U.S. Geological Survey, which reports what producers receive on average across the whole country:

Published gravel and crushed stone prices
What it coversPublished priceWhat it includesSource, as of
Bulk crushed stone and gravel per ton[src] Sources: HomeGuide$10 to $50 per tonbulk material, before deliveryHomeGuide, December 2025
Bulk gravel per cubic yard[src] Sources: HomeGuide$15 to $75 per cubic yardbulk material, before deliveryHomeGuide, December 2025
Gravel delivery per ton[src] Sources: HomeGuide$10 to $25 per tonor free with a 5-ton minimum order up to 5 milesHomeGuide, December 2025
Crushed stone, U.S. average value at the producer[src] Sources: U.S. Geological Survey$18.50 per metric tonestimated 2025 average unit value, all crushed stone, per metric tonU.S. Geological Survey, February 2026
Construction sand and gravel, U.S. average value at the producer[src] Sources: U.S. Geological Survey$14.50 per metric tonestimated 2025 average unit value, per metric tonU.S. Geological Survey, February 2026
USGS figures are national averages per metric ton, estimated for 2025 and published in February 2026.

The USGS figures are a wholesale benchmark, not a store price. They average every ton of crushed stone or construction sand and gravel sold in the country, most of it in large loads for roads and concrete. In US tons, the 2025[src] Sources: U.S. Geological Survey estimates work out to $16.78[src] Sources: U.S. Geological Survey for crushed stone and $13.15[src] Sources: U.S. Geological Survey for sand and gravel (one US ton is 0.9072 metric tons). Retail prices sit above that because they include screening, stockpiling, the yard’s costs and smaller orders.

The USGS series also shows the trend. Its average value for crushed stone rose from $13.26[src] Sources: U.S. Geological Survey per metric ton in 2021[src] Sources: U.S. Geological Survey to an estimated $18.50[src] Sources: U.S. Geological Survey in 2025[src] Sources: U.S. Geological Survey, and for construction sand and gravel from $10.52[src] Sources: U.S. Geological Survey to $14.50[src] Sources: U.S. Geological Survey over the same years.

How much is 1 ton of gravel?

One ton of gravel costs $10 to $50 per ton[src] Source: HomeGuide in bulk at HomeGuide’s range, plus delivery of $10 to $25 per ton[src] Source: HomeGuide. Buying a ton or less is where prices climb: HomeGuide says small quantities can cost more than $100 per ton[src] Sources: HomeGuide.

1 ton of gravel is less than people expect. At the typical dry weight it is about 0.71 cubic yards[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. Here is how far it spreads:

To turn an area into tons for your own project, use the gravel calculator, or convert cubic yards to tons for any material.

How much is a yard of gravel?

A yard of gravel costs $15 to $75 per cubic yard (HomeGuide, as of December 2025)[src] Source: HomeGuide. Suppliers price gravel by the ton or by the cubic yard, and the two are linked by weight. Dry gravel weighs about 1.42 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing per cubic yard, so:

Applied to HomeGuide’s per-ton range, that gives $14.18[src] Sources: HomeGuide; Headquarters, Department of the Army; Rockland Manufacturing to $70.88[src] Sources: HomeGuide; Headquarters, Department of the Army; Rockland Manufacturing per cubic yard, close to the $15 to $75[src] Source: HomeGuide per yard HomeGuide publishes. When two yards quote in different units, convert one so you compare like with like. The gravel cost calculator does this when you switch the price unit between $/ton and $/yd³.

Gravel prices by type

Gravel prices vary by type more than by anything else. Base and fill materials made from crushed rock cost the least; washed, screened and decorative stone costs more. HomeGuide’s list, for sizes up to 2”[src] Sources: HomeGuide with delivery:

Gravel price per ton by type (HomeGuide, as of December 2025)
Gravel typePrice per ton
Road base gravel[src] Sources: HomeGuide$18 to $30
Crusher run[src] Sources: HomeGuide$24 to $34
Pea gravel[src] Sources: HomeGuide$28 to $45
Crushed limestone[src] Sources: HomeGuide$30 to $38
River rock[src] Sources: HomeGuide$33 to $49
Crushed concrete[src] Sources: HomeGuide$11 to $53
HomeGuide lists these for gravel sizes up to 2 in with delivery, and notes discounts on orders over 15 tons.

For a driveway, the base layer is usually the cheaper crushed material and only the top layer is the stone you see. For river rock and other landscape stone, the stone calculator works out the amount.

Gravel cost by order size

What an order costs is the tons times the price per ton, plus delivery. This table applies HomeGuide’s material and delivery ranges to common order sizes:

Gravel cost by order size at HomeGuide's published ranges
Order sizeAt HomeGuide range (December 2025)At HomeGuide range (December 2025)
1 ton$10 – $50$10 – $25
3 tons$30 – $150$30 – $75
5 tons$50 – $250$50 – $125
10 tons$100 – $500$100 – $250
15 tons$150 – $750$150 – $375
20 tons$200 – $1,000$200 – $500
Order size × the low and high end of each published range. Material only, before taxes and any fees the range leaves out.

The first column is the material and the second the delivery, so add them for a delivered total. HomeGuide notes that delivery is free with a 5-ton[src] Sources: HomeGuide minimum within 5 miles[src] Sources: HomeGuide from some suppliers, and that its prices by type carry discounts on orders over 15 tons[src] Sources: HomeGuide. How many tons fit in one load depends on the truck: the Texas Department of Transportation says single-axle trucks normally carry 6 cubic yards[src] Sources: Texas Department of Transportation, about 8.51 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing of dry gravel. The guide to how many yards fit in a dump truck covers bigger trucks.

Worked examples

Each example uses dry gravel at 2,835 lb[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing per cubic yard and HomeGuide’s per-ton range. Your total will use your own quote.

Garden path, 3 ft × 30 ft at 3 in. The path takes 0.83 cubic yards, or 1.18 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. At $10 to $50 per ton[src] Source: HomeGuide the material costs $12[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing; HomeGuide to $59[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing; HomeGuide. With an order this small, the delivery charge or a minimum order may cost more than the gravel.

Single-car driveway, 12 ft × 25 ft at 4 in. The driveway takes 3.7 cubic yards, or 5.25 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. Material costs $53[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing; HomeGuide to $263[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing; HomeGuide, and delivery at HomeGuide’s range adds $53[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing; HomeGuide to $131[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing; HomeGuide.

Long driveway, 10 ft × 100 ft at 4 in. The driveway takes 12.35 cubic yards, or 17.5 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. Material costs $175[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing; HomeGuide to $875[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing; HomeGuide before delivery. At this size, ask about a volume discount.

The depths are examples, not recommendations. Ask your supplier or contractor what depth your soil and traffic need.

Why gravel prices vary

Gravel is cheap to dig and expensive to move, so distance shapes the price more than almost anything else. These are the main reasons two quotes differ:

Gravel prices near me: how to get a local quote

Gravel prices near you come from the quarries and landscape supply yards within delivery range. Ask each one the same questions:

  1. The price per ton or per cubic yard for the exact product, by name and size.
  2. Whether the price includes delivery, and the charge per load or per mile.
  3. The minimum order for delivery.
  4. How much one truckload holds, so you know how many loads you need.
  5. Whether they will spread the load or only dump it.

If one yard quotes per ton and another per yard, convert with the weight above, or switch the price unit in the calculator. Most yards weigh loads on a scale, so ask for the scale ticket to check what you were charged for.

Common mistakes when pricing gravel

How this page’s prices are checked

Every price on this page comes from a dated source: HomeGuide’s gravel price guide, dated December 19, 2025[src] Sources: HomeGuide, and the U.S. Geological Survey’s Mineral Commodity Summaries, published in February 2026[src] Sources: U.S. Geological Survey. Both are linked in the sources below. Prices are re-checked every quarter, and any change is logged in the update history. Looking for concrete instead? See how much concrete costs per yard.

Frequently asked questions

How much is 1 ton of gravel?

HomeGuide lists bulk crushed stone and gravel at $10 to $50 per ton as of December 2025, before delivery. Delivery adds $10 to $25 per ton, and small quantities can cost more than $100 per ton.

How much is gravel per ton at the quarry?

The U.S. Geological Survey puts the average value of crushed stone at the producer at an estimated $18.50 per metric ton for 2025, or $16.78 per US ton. That is a national wholesale average across all crushed stone, not a retail price.

How much is a yard of gravel?

HomeGuide lists bulk gravel at $15 to $75 per cubic yard. One cubic yard of dry gravel weighs about 1.42 tons, so a per-ton price times 1.42 gives the price per yard.

How much does a ton of gravel cover?

One ton of dry gravel is about 0.71 cubic yards. Spread 3 inches deep it covers about 76 square feet, and 2 inches deep about 114 square feet.

What is the cheapest kind of gravel?

In HomeGuide's price list, crushed concrete starts lowest at $11 per ton and road base costs $18 to $30 per ton. River rock and decorative stone cost more.

How do I find gravel prices near me?

Call two or three local quarries or landscape supply yards and ask for the delivered price per ton or per yard, the delivery charge and the minimum order. Enter the quote in the calculator on this page to total your job.

Why are gravel prices rising?

The U.S. Geological Survey expected factors that support price increases for crushed stone in 2026, especially near metropolitan areas, where regional shortages and higher fuel costs could push prices up faster than average.

Sources and references

  1. HomeGuide. How Much Does Crushed Stone or Gravel Cost? (2026). homeguide.com/costs/gravel-prices. Accessed November 16, 2026.
  2. U.S. Geological Survey. Mineral Commodity Summaries 2026: Stone (Crushed). pubs.usgs.gov/periodicals/mcs2026/mcs2026-stone-crushed.pdf. Accessed November 16, 2026.
  3. U.S. Geological Survey. Mineral Commodity Summaries 2026: Sand and Gravel (Construction). pubs.usgs.gov/periodicals/mcs2026/mcs2026-sand-gravel.pdf. Accessed November 16, 2026.
  4. Headquarters, Department of the Army. FM 5-434 Earthmoving Operations, Table 1-2. Material Weight, Swell Percentages, and Load Factors. vulcanhammer.net/wp-content/uploads/2017/01/fm5_434.pdf. Accessed November 11, 2026.
  5. Rockland Manufacturing. Weights of Materials. rocksi.rocklandmfg.com/desktop/assets/Rockland-Weights-of-Materials.pdf. Accessed November 11, 2026.
  6. Texas Department of Transportation. Seal Coat and Surface Treatment Manual, Section 5: Haul Trucks — Size. www.txdot.gov/manuals/mnt/scm/equipment_inspection/haul_trucks-i1008556/size-i1008586.html. Accessed November 11, 2026.

Prices checked November 16, 2026. Prices are reviewed every 90 days; next review due February 14, 2027.

Update history

  • — First published with HomeGuide (December 2025) prices and USGS 2025 producer values.