Skip to content

What Is a Cubic Yard?

A cubic yard is the volume of a cube 3 feet long, 3 feet wide and 3 feet tall: 27 cubic feet in all. It is the unit bulk dirt, gravel, mulch and sand are commonly ordered in, and the unit ready-mix concrete is sold by. Spread out, one cubic yard covers 108 square feet at 3 inches deep.

Key facts

  • 1 cubic yard = 3 ft × 3 ft × 3 ft = 27 cubic feet.

  • 1 cubic yard = 36 in × 36 in × 36 in = 46,656 cubic inches.

  • One cubic yard equals 0.765 cubic meters.

  • One cubic yard covers 324 square feet at 1 inch deep and 108 square feet at 3 inches.

  • The National Ready Mixed Concrete Association says concrete is sold by volume, in cubic yards[src] Sources: National Ready Mixed Concrete Association (NRMCA).

What is a cubic yard?

A cubic yard is a unit of volume equal to a cube that measures one yard on every side. A yard is 3 feet, so the cube is 3 feet by 3 feet by 3 feet. Fill that cube with one-foot cubes and it holds 3 across, 3 deep and 3 high, which is 27 cubic feet.

One cubic yard drawn as a cubeA cube 3 feet long, 3 feet wide and 3 feet tall, split into 27 one-foot cubes.3 ft3 ft3 ft
One cubic yard: 3 ft × 3 ft × 3 ft = 27 cubic feet. Each small cube is one cubic foot.

You will see a cubic yard written as yd³, cu yd, cy or just “yard”. In landscaping and construction, a “yard” of material always means a cubic yard of volume, not a yard of length.

How big is a cubic yard?

A cubic yard is the size of a box 3 feet on every side. In metric terms, that cube is 0.9144 meters on a side, and its volume is 0.765 cubic meters.

Few materials stay in a cube, though. When you spread a cubic yard, its area depends on how deep you lay it:

Area one cubic yard covers at each depth
Depth (in)Area covered by 1 yd³ (ft²)Cubic yards per 100 ft² (yd³)
13240.31
21620.62
31080.93
4811.23
6541.85
12273.7
Pure arithmetic: 27 cubic feet ÷ (depth in inches ÷ 12). Rounded to 2 decimals.

How big is 1 cubic yard spread out?

Spread 3 inches deep, one cubic yard covers a square about 10.4 feet on each side. At 1 inch it covers a square about 18 feet on each side. These are the same volume in different shapes.

How big are 2, 3, 4 and 10 cubic yards?

The drawing below shows, to scale, the area each volume covers when spread 3 inches deep:

Squares drawn to scale showing the area 1, 2, 3, 4, 10 cubic yards cover at 3 inches deep1 yd³10.4 × 10.4 ft2 yd³14.7 × 14.7 ft3 yd³18 × 18 ft4 yd³20.8 × 20.8 ft10 yd³32.9 × 32.9 ft
Drawn to scale. Each square is the area the volume covers at 3 inches deep: cubic yards × 27 ÷ (3 ÷ 12).
Volume Cubic feet Cubic meters As a 3 × 3 ft box, length Covers at 3 in Covers at 6 in
1 yd³ 27 0.76 3 ft 108 ft² 54 ft²
2 yd³ 54 1.53 6 ft 216 ft² 108 ft²
3 yd³ 81 2.29 9 ft 324 ft² 162 ft²
4 yd³ 108 3.06 12 ft 432 ft² 216 ft²
10 yd³ 270 7.65 30 ft 1,080 ft² 540 ft²

2, 3, 4 and 10 cubic yards at a glance

Multiply by 27 for cubic feet and by 108 for square feet covered 3 inches deep. Each size has its own page with coverage, weight, bag and truckload tables and a scale drawing:

Fractions of a cubic yard

Small jobs often need less than one full cubic yard. A fraction of a cubic yard is that fraction of 27 cubic feet, and it covers that fraction of the area:

Fraction of a yard Cubic feet Covers at 2 in Covers at 3 in
1/4 yd³ 6.8 41 ft² 27 ft²
1/3 yd³ 9 54 ft² 36 ft²
1/2 yd³ 13.5 81 ft² 54 ft²
2/3 yd³ 18 108 ft² 72 ft²
3/4 yd³ 20.3 122 ft² 81 ft²

Half a yard is 13.5 cubic feet, which is close to seven bags of 2 cubic feet (7 bags once rounded up). When a supplier quotes by the half yard, round your order up to the next half, not down, so a thin spot does not leave bare ground.

A cubic yard in other units

Because a cubic yard is defined by length, it converts exactly into every other volume unit:

Cubic yards Cubic feet Cubic inches Cubic meters Liters
0.25 6.75 11,664 0.191 191
0.5 13.5 23,328 0.382 382
1 27 46,656 0.765 765
5 135 233,280 3.823 3,823

Liters are useful when comparing with bagged products that list their volume in liters.

How big is a cubic yard of dirt?

A cubic yard of dirt takes up the same 27 cubic feet as any other material, but it is heavy. A cubic yard of dry, loose fill dirt weighs about 2,106 pounds[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing, more than a ton. The U.S. Army earthmoving manual lists dry loam at 1,900 to 2,200[src] Sources: Headquarters, Department of the Army pounds per cubic yard and wet loam at 2,800 to 3,200[src] Sources: Headquarters, Department of the Army.

How much does a cubic yard weigh?

Weight depends on the material and on moisture. These are dry, loose figures:

Weight of one cubic yard (dry, loose)
MaterialTypical weight (lb/yd³)Published range (lb/yd³)Tons per yd³ (tons)
Fill dirt (earth, loam or silt)[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing2,1061,900–2,2001.05
Sand[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing2,7002,600–2,9001.35
Gravel[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing2,8352,700–3,0001.42
Clay[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing1,8361,700–2,0000.92
Typical weight is the Rockland figure where it falls inside the U.S. Army FM 5-434 range. Moisture and compaction raise the weight. Tons are short tons of 2,000 lb.

To convert any volume to tons, use the convert cubic yards to tons tool.

Cubic yard vs yard vs square yard

The three are easy to mix up:

Unit What it measures Size
Yard Length 3 feet
Square yard Area 3 ft × 3 ft = 9 square feet
Cubic yard Volume 3 ft × 3 ft × 3 ft = 27 cubic feet

A cubic yard spread exactly 1 yard deep would cover 1 square yard. At more realistic depths it covers much more: at 3 inches it covers 12 square yards.

Cubic yards vs cubic meters

One cubic yard is 0.765 cubic meters, and one cubic meter is 1.31 cubic yards. A cubic meter is a little bigger. If a plan gives metric volumes, the cubic feet to cubic yards converter handles cubic meters too.

How much is a cubic yard?

A cubic yard is a unit of volume, so the question is really what a cubic yard of a particular material costs. That depends on the material, your area, how much you buy and delivery, so this site does not publish prices. Concrete, for example, is sold by volume in cubic yards according to the National Ready Mixed Concrete Association. Every calculator here has a price field where you can enter your local price per cubic yard.

Work out cubic yards for your project

Use this calculator to turn your measurements into cubic yards. Change the shape, length, width and depth:

Area shape

For uneven ground and spills.

You need

1.11cubic yards

Cubic feet
30 ft³
Cubic meters
0.85 m³
Tandem loads (12 yd³)
1

A 12 ft × 10 ft area, 3 in deep, needs 1.11 cubic yards (30 cubic feet).

Estimate only — confirm quantities with your supplier before ordering.

More options: material weight and price

For specific materials with their own defaults, see the dirt calculator, the mulch calculator and the full cubic yard calculator.

Common misunderstandings

Frequently asked questions

What is a cubic yard?

A cubic yard is the volume of a cube 3 feet long, 3 feet wide and 3 feet tall. That is 27 cubic feet, or about 0.765 cubic meters.

How big is a cubic yard?

About the size of a box 3 feet on each side. Spread out, one cubic yard covers 108 square feet at 3 inches deep, or 324 square feet at 1 inch.

How big is half a cubic yard?

Half a cubic yard is 13.5 cubic feet. Spread 3 inches deep it covers 54 square feet.

How much does a cubic yard weigh?

It depends on the material. Dry, loose gravel weighs about 2,835 pounds, dry sand about 2,700 pounds and dry fill dirt about 2,106 pounds per cubic yard.

How much is a cubic yard?

A cubic yard is a unit of volume, not a price. What a cubic yard of material costs depends on the material, your region and delivery, so this site does not publish prices. Every calculator lets you enter your own price per cubic yard.

Is a yard the same as a cubic yard?

When you order dirt, gravel, mulch or concrete, a yard means a cubic yard of volume. A yard of length is 3 feet, and a square yard is a flat area of 9 square feet.

How many cubic feet are in 2 cubic yards?

Two cubic yards is 54 cubic feet, because each cubic yard is 27 cubic feet. Half a cubic yard is 13.5 cubic feet.

Sources and references

  1. Headquarters, Department of the Army. FM 5-434 Earthmoving Operations, Table 1-2. Material Weight, Swell Percentages, and Load Factors. vulcanhammer.net/wp-content/uploads/2017/01/fm5_434.pdf. Accessed November 11, 2026.
  2. Rockland Manufacturing. Weights of Materials. rocksi.rocklandmfg.com/desktop/assets/Rockland-Weights-of-Materials.pdf. Accessed November 11, 2026.
  3. Texas Department of Transportation. Seal Coat and Surface Treatment Manual, Section 5: Haul Trucks — Size. www.txdot.gov/manuals/mnt/scm/equipment_inspection/haul_trucks-i1008556/size-i1008586.html. Accessed November 11, 2026.
  4. Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky). Dump Truck | Highway Knowledge Portal. kykp.gov/knowledge-portal/articles/truck-dump/. Accessed November 11, 2026.
  5. National Ready Mixed Concrete Association (NRMCA). CIP 31 — Ordering Ready Mixed Concrete. www.nrmca.org/wp-content/uploads/2021/01/31pr.pdf. Accessed November 12, 2026.

Update history

  • — Short answers for 2, 3, 4 and 10 cubic yards now link to their own pages.
  • — First published.