Sod Calculator
This sod calculator turns your lawn size into square feet, pieces and pallets of sod, plus the topsoil underneath: a lawn 50 × 20 ft needs 1,000 square feet, or 3 pallets of 450 square feet.
For cuts and edges.
You need
1,000square feet
- Pieces (24 × 16 in)
- 375
- Pallets (450 ft² each)
- 3
- Square yards
- 111.11 yd²
- Topsoil at 6 in
- 18.52 yd³
1,000 square feet of lawn needs 1,000 square feet of sod: 375 pieces or 3 pallets.
Estimate only — confirm quantities with your supplier before ordering.
More options: piece and pallet size, topsoil, price
Ask your sod farm; pallets vary.
Extension guides: 4–6 in. Enter 0 to skip.
The piece size, pallet size and topsoil depth start at published figures, and you can change each one under More options to match your sod farm. Add an extra percentage for cuts and edges; Purdue Extension suggests 10 percent[src] Sources: Purdue Extension. The calculator opens with an example lawn; replace it with your measurements.
Key facts
Sod slabs are commonly 16 x 24[src] Sources: Sod Solutions; McCall Sod Farm inches, or 2.67 square feet each.
A pallet typically holds about 450 square feet[src] Sources: Purdue Extension (Purdue) or 450 to 500 square feet[src] Sources: Mississippi State University Extension Service (Mississippi State).
Purdue Extension suggests adding 10 percent[src] Sources: Purdue Extension for miscalculations and waste.
Penn State and New Mexico State call for 4 to 6[src] Sources: Penn State Extension; New Mexico State University, College of Agricultural, Consumer and Environmental Sciences inches of topsoil, firmed, for a new lawn.
1 square yard = 9 square feet.
How we calculate
Formula
Sod (ft²) = lawn area × (1 + extra % ÷ 100)
Pieces = sod ÷ (piece length × width ÷ 144), rounded up
Pallets = sod ÷ pallet size, rounded up
Topsoil (yd³) = lawn area × depth (in) ÷ 12 ÷ 27
Assumptions and defaults
Piece size starts at 24[src] Sources: Sod Solutions; McCall Sod Farm × 16 inches[src] Sources: Sod Solutions; McCall Sod Farm, the slab size Sod Solutions and McCall Sod Farm both give.
Pallet size starts at 450 square feet[src] Sources: Purdue Extension; Mississippi State University Extension Service; Sod Solutions; McCall Sod Farm, Purdue’s figure and inside the ranges from Mississippi State and Sod Solutions.
Topsoil starts at 6 inches[src] Sources: Penn State Extension; New Mexico State University, College of Agricultural, Consumer and Environmental Sciences, the upper end of the Penn State and New Mexico State range. It is figured for the lawn area itself, without the sod margin.
- The extra percentage starts at zero so you choose it.
How much sod do I need?
The sod you need is the lawn area plus a margin for cutting around beds, paths and curves.
- Measure the lawn in feet. Split it into rectangles, circles and triangles and add them up.
- Multiply length × width for each rectangle to get square feet.
- Add a margin. Purdue Extension’s example divides the total by 9[src] Sources: Purdue Extension to get square yards, then adds 10 percent[src] Sources: Purdue Extension to account for miscalculations and waste.
- Divide by the piece size for pieces, or by the pallet size for pallets, and round up.
For a back lawn 60 feet by 40 feet: 2,400 square feet. With 10 percent extra, that is 2,640 square feet, or 6 pallets of 450 square feet.
How many pallets of sod do I need?
Divide the square feet you need by the square feet on one pallet, and round up. Pallet sizes differ between farms:
| Source | Square feet per pallet |
|---|---|
| Purdue Extension | About 450[src] Sources: Purdue Extension |
| Mississippi State Extension | Typically 450 to 500[src] Sources: Mississippi State University Extension Service |
| Sod Solutions | Typically 400 to 500[src] Sources: Sod Solutions; slab pallets 399, 452 or 503[src] Sources: Sod Solutions |
| McCall Sod Farm | 450 or 500[src] Sources: McCall Sod Farm |
Ask your farm for its exact pallet size and enter it under More options. With 450 square foot pallets:
| Lawn size | Square feet | Pallets (no extra) | Pallets (+10 %) |
|---|---|---|---|
| 20 × 30 ft | 600 | 2 | 2 |
| 30 × 40 ft | 1,200 | 3 | 3 |
| 50 × 40 ft | 2,000 | 5 | 5 |
| 60 × 50 ft | 3,000 | 7 | 8 |
| 100 × 50 ft | 5,000 | 12 | 13 |
How many pieces of sod do I need?
Divide the square feet by the area of one piece. Sod Solutions describes slabs measuring 16 x 24 inches[src] Sources: Sod Solutions, and McCall Sod Farm says a piece is 16 by 24 inches[src] Sources: McCall Sod Farm. That is 2.67 square feet per piece, so 1,000 square feet takes 375 pieces.
Rolls are different. Sod Solutions says mini hand rolls measure 40 x 18 inches[src] Sources: Sod Solutions and cover five square feet each. If your farm sells rolls, change the piece size under More options.
How much topsoil do I need for sod?
Penn State Extension says a minimum of 4 to 6 inches[src] Sources: Penn State Extension of good topsoil, firmed or settled, is needed to establish good turf, and New Mexico State aims for 4–6 inches[src] Sources: New Mexico State University, College of Agricultural, Consumer and Environmental Sciences after firming. The calculator starts at 6 inches[src] Sources: Penn State Extension; New Mexico State University, College of Agricultural, Consumer and Environmental Sciences. Set it to 0 if your soil is already good.
Not every source agrees: McCall Sod Farm’s install steps say to spread 2–3 inches[src] Sources: McCall Sod Farm of quality topsoil if needed. Where the sources differ, the calculator starts from the extension figure. Lower it if your existing soil is already in good shape.
Purdue Extension notes that about 19 cubic yards[src] Sources: Purdue Extension of topsoil makes a 6-inch[src] Sources: Purdue Extension layer over 1,000 square feet[src] Sources: Purdue Extension; the exact figure is 18.52 cubic yards. For a full topsoil estimate with weight and truckloads, use the topsoil calculator.
Square feet or square yards?
Sod may be sold by the square foot, the square yard or the pallet. Mississippi State Extension notes that one square yard equals 9 square feet[src] Sources: Mississippi State University Extension Service. The calculator shows square yards next to square feet, and the price field takes a price per square foot, square yard or pallet. For other flat areas, the square yard calculator handles conversions.
How to measure a lawn for sod
Accurate measurements save you from a second order. A simple way to do it:
- Sketch the lawn on paper, including beds, paths and the house.
- Split the lawn into rectangles, circles and triangles.
- Measure each piece in feet with a long tape. For triangles, measure the base and the height at a right angle to it.
- Work out each area and add them. Subtract beds and paths that will not get sod.
- Add your margin for cuts, then divide by the pallet or piece size.
The calculator has Rectangle, Circle and Triangle tabs. Run it once per piece, or add the pieces by hand and enter the total as a rectangle with a width of 1 foot.
Sod for odd-shaped lawns
A triangle-shaped corner with a 30 foot base and 20 foot height is 300 square feet. A round lawn 30 feet across is 707 square feet. Curved edges mean more cutting, so a margin matters most there.
Sod and topsoil for common lawn sizes
This table shows square yards of sod and cubic yards of topsoil at 4 and 6 inches for common lawn sizes, without any margin:
| Lawn | Square feet | Square yards | Topsoil at 4 in | Topsoil at 6 in |
|---|---|---|---|---|
| 20 × 30 ft | 600 | 66.67 | 7.41 yd³ | 11.11 yd³ |
| 40 × 25 ft | 1,000 | 111.11 | 12.35 yd³ | 18.52 yd³ |
| 50 × 40 ft | 2,000 | 222.22 | 24.69 yd³ | 37.04 yd³ |
| 60 × 50 ft | 3,000 | 333.33 | 37.04 yd³ | 55.56 yd³ |
Worked examples
Small front lawn. 25 feet by 20 feet: 500 square feet. With 10 % extra: 550 square feet, 207 pieces, or 2 pallets.
Round play lawn. A circle 30 feet across: 707 square feet, or 2 pallets.
New-build back yard. 70 feet by 40 feet with 6 inches of topsoil: 2,800 square feet of sod and 51.85 cubic yards of topsoil.
Common mistakes
- No margin. Curves and beds waste sod; add extra.
- Assuming a pallet size. Farms differ; ask.
- Skipping soil prep. Check the topsoil depth guidance above before you order.
- Ordering topsoil for the sod margin. Topsoil covers the lawn area only.
Edging the new lawn with beds? The mulch calculator handles those, and the cubic yard calculator covers any other shape.