How Many Yards of Dirt in a Dump Truck?
A single-axle dump truck normally carries about 6 cubic yards[src] Sources: Texas Department of Transportation and a tandem-axle truck usually holds 12 or 14 cubic yards[src] Sources: Texas Department of Transportation, according to the Texas Department of Transportation. So how many yards of dirt fit in a dump truck is about 6[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) in a small truck and 12[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) to 14[src] Sources: Texas Department of Transportation in a tandem. A full tandem load of dry dirt weighs about 12.64 tons[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky); Headquarters, Department of the Army; Rockland Manufacturing.
Key facts
TxDOT: single-axle trucks normally carry 6 cubic yards[src] Sources: Texas Department of Transportation of aggregate.
TxDOT: tandem-axle beds usually hold 12 or 14 cubic yards[src] Sources: Texas Department of Transportation.
Kentucky Transportation Cabinet: a single-axle dump has almost 60%[src] Sources: Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) of a tandem’s capacity.
A 12 cubic yard[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) load of dry fill dirt weighs about 12.64 tons[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky); Headquarters, Department of the Army; Rockland Manufacturing.
NRMCA: concrete truck mixers hold 8 to 12 cubic yards[src] Sources: National Ready Mixed Concrete Association (NRMCA).
Dump truck sizes in cubic yards
Dump trucks are usually described by their axles, and trucks with more axles carry more. Two transportation agencies give these figures:
| Truck | Typical capacity | Source |
|---|---|---|
| Single axle | Normally 6 cubic yards[src] Sources: Texas Department of Transportation of aggregate | Texas DOT |
| Single axle | Class listed as “4 YD[src] Sources: Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) & Above” | Kentucky Transportation Cabinet |
| Tandem axle | Usually 12 or 14 cubic yards[src] Sources: Texas Department of Transportation | Texas DOT |
| Tandem axle | Classes of 8-10[src] Sources: Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) and 10-12[src] Sources: Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) yards | Kentucky Transportation Cabinet |
| Baby dump | Rated at 1.5 ton[src] Sources: Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) | Kentucky Transportation Cabinet |
The calculators on this site use 6 cubic yards[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) for a single axle and 12 cubic yards[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) for a tandem, which sit inside both agencies’ figures. The Kentucky Transportation Cabinet also describes the single-axle dump as having almost 60%[src] Sources: Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) of a tandem’s capacity, which matches TxDOT’s 6[src] Sources: Texas Department of Transportation against 12[src] Sources: Texas Department of Transportation closely.
TxDOT adds that the capacity of a bed may be increased by adding boards at the top of the sides, so a truck can sometimes carry more than its standard figure by volume.
How many yards of dirt does a dump truck hold?
A dump truck holds roughly 6 cubic yards[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) of dirt in a single-axle truck and 12[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) to 14 cubic yards[src] Sources: Texas Department of Transportation in a tandem, by bed volume. Use this calculator to see how many loads your job takes and what each load weighs:
You need
2loads
- Truck size used
- 12 yd³
- Total weight (dry fill dirt)
- 21.06 tons
- Weight of a full load
- 12.64 tons
20 cubic yards takes 2 loads in a 12 cubic yard truck.
Estimate only — confirm quantities with your supplier before ordering.
How many tons of dirt are in a dump truck?
Tons depend on the material’s weight per cubic yard. At typical dry, loose weights:
Moisture changes these a lot. The U.S. Army earthmoving manual lists dry loam at 1,900 to 2,200[src] Sources: Headquarters, Department of the Army pounds per cubic yard but wet loam at 2,800 to 3,200[src] Sources: Headquarters, Department of the Army. A truck full of wet dirt can weigh far more than the dry figures above, so a supplier may load fewer yards of heavy or wet material. Ask how many yards or tons they put on each truck.
How much a wet load weighs
The Army manual’s wet ranges show how much heavier a load can get. A 12 cubic yard load of wet loam (common earth) would weigh 16.2 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing to 19.2 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing, compared with about 12.64 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing dry. Wet sand runs 16.8 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing to 19.44 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing for the same 12 cubic yards. That is why the yards a supplier loads can depend on the weather as much as on the truck.
How many yards of gravel are in a dump truck?
The bed holds the same volume whether it carries gravel or dirt, but gravel is heavier per yard. At the general dry gravel weight of 2,835 pounds[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing per cubic yard, a 12 cubic yard[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) load weighs about 17.01 tons[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky); Headquarters, Department of the Army; Rockland Manufacturing. Because weight can run out before space does, some suppliers quote gravel in tons. The gravel calculator gives both.
How many yards of concrete per truck?
Concrete arrives in a truck mixer, not a dump truck. The National Ready Mixed Concrete Association says the capacity of truck mixers varies between 8 to 12 cubic yards[src] Sources: National Ready Mixed Concrete Association (NRMCA), and that concrete is sold by volume in cubic yards. For a slab or footing, work out the yards with the concrete calculator, then divide by your supplier’s truck size.
How many dump truck loads do I need?
To count loads, divide the cubic yards you need by the truck size and round up.
- Work out the cubic yards with the dirt calculator, the topsoil calculator or the cubic yard calculator.
- Ask the supplier how many yards their truck carries for your material.
- Divide and round up.
For two common amounts, the pages on 10 cubic yards and 20 cubic yards show the loads, the weight per load and what happens when the material is dug out rather than delivered.
Single axle or tandem: which to order?
A tandem truck carries about twice what a single-axle truck does: TxDOT gives 12 or 14 cubic yards[src] Sources: Texas Department of Transportation against 6[src] Sources: Texas Department of Transportation. For a big job that means fewer trips and fewer delivery fees. For a small job, or a driveway with tight access, a smaller truck may be the only option. Ask your supplier which trucks they run, what each one carries for your material, and whether there is a minimum order.
Planning a delivery
- Work out the total cubic yards, and the tons if the material is sold by weight.
- Ask the supplier which truck they will send and how many yards or tons it carries.
- Divide your total by that load size and round up to get the number of deliveries.
- Pick a dump spot close to where the material will be used, on firm ground.
- Have the price per yard or per ton and the delivery fee in writing before the first load.
Loose yards vs in-ground yards
Dirt swells when it is dug up, so a truckload of loose dirt is less than a truckload’s worth of hole. The U.S. Army earthmoving manual says one cubic yard of loam in the ground becomes about 1.25[src] Sources: Headquarters, Department of the Army loose cubic yards. If you are hauling dirt away from an excavation, count the extra volume:
| Material | 1 yd³ in the ground → loose (yd³) | 1 loose yd³ → compacted (yd³) | 1 loose yd³ → in-ground (yd³) |
|---|---|---|---|
| Sand or gravel[src] Sources: Headquarters, Department of the Army | 1.11 | 0.86 | 0.9 |
| Loam (common earth)[src] Sources: Headquarters, Department of the Army | 1.25 | 0.72 | 0.8 |
| Clay[src] Sources: Headquarters, Department of the Army | 1.43 | 0.63 | 0.7 |
For example, digging out 20 cubic yards of loam in the ground gives about 25 loose cubic yards[src] Sources: Headquarters, Department of the Army, which is 3 tandem loads[src] Sources: Headquarters, Department of the Army; Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky), not 2[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky).
Clay swells even more. The same manual gives a factor of 1.43[src] Sources: Headquarters, Department of the Army for clay, so 20 cubic yards of clay dug from the ground becomes about 29 loose cubic yards[src] Sources: Headquarters, Department of the Army, or 3 tandem loads[src] Sources: Headquarters, Department of the Army; Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky).
Worked examples
New lawn topsoil. 2,000 square feet at 6 inches is 37.04 cubic yards: 4 tandem loads[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky), about 39 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing in all.
Driveway gravel. 100 feet by 12 feet at 4 inches is 14.81 cubic yards: 2 tandem loads[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) by volume, about 21 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing.
Backfill. 8 cubic yards of fill dirt fits in 1 tandem load[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky), or 2 single-axle loads[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky).
Common mistakes
- Assuming every truck is the same. Ask the supplier what their trucks carry.
- Ignoring weight. Heavy or wet materials can fill a truck’s weight rating before its bed.
- Forgetting swell. Dirt dug from the ground takes up more room in the truck.
- Mixing up dump trucks and concrete mixers. They carry different amounts.
To convert any volume into tons, use the convert cubic yards to tons tool.