Landscape Material Weight & Coverage Reference
This reference collects every material value the YardCalculator calculators use: weights per cubic yard, bag yields, recommended depths, truck sizes, swell and compaction factors, and dated price ranges. Each value lists the sources it comes from and the date they were read, and the tables are built from the same verified data the calculators run on.
Key facts
One cubic yard is 27 cubic feet and covers 108 square feet at 3 inches deep.
Dry, loose gravel: 2,835 lb[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing per cubic yard. Dry sand: 2,700 lb[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. Dry fill dirt: 2,106 lb[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing.
An 80 lb bag of concrete mix makes 0.6 cubic feet[src] Sources: The QUIKRETE Companies; Sakrete (CRH); 45[src] Sources: The QUIKRETE Companies; Sakrete (CRH) bags make a cubic yard.
Mulch depth: 2[src] Sources: University of Illinois Extension; The University of Tennessee Agricultural Extension Service to 4 inches[src] Sources: University of Illinois Extension; The University of Tennessee Agricultural Extension Service, per university extension guides.
Download: every value as a CSV file, with sources, source addresses and dates. Printable cheat sheets: cubic yard coverage chart (PDF) and bag conversion chart (PDF).
Weight of landscape materials per cubic yard
These are the weights of one cubic yard of dry, loose material, as delivered. “Typical” is the value the calculators use; it was chosen only where two independent sources agree, and it lies inside the published range. Wet weights are shown as ranges because the sources disagree on a single figure.
| Item | Typical (used by calculators) | Published range | Unit | Tons per cubic yard | lb per cubic foot | Sources (date read) |
|---|---|---|---|---|---|---|
| Fill dirt (earth, loam or silt), dry and loose[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 2,106 | 1,900–2,200 | lb per cubic yard | 1.05 | 78 | Headquarters, Department of the Army; Rockland Manufacturing (read 2026-11-11) |
| Fill dirt (earth, loam or silt), wet[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | — | 2,700–3,200 | lb per cubic yard | — | — | Headquarters, Department of the Army; Rockland Manufacturing (read 2026-11-11) |
| Topsoil (uses the loam / fill-dirt weight), dry and loose[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 2,106 | 1,900–2,200 | lb per cubic yard | 1.05 | 78 | Headquarters, Department of the Army; Rockland Manufacturing (read 2026-11-11) |
| Sand, dry and loose[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 2,700 | 2,600–2,900 | lb per cubic yard | 1.35 | 100 | Headquarters, Department of the Army; Rockland Manufacturing (read 2026-11-11) |
| Sand, wet[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | — | 2,800–3,240 | lb per cubic yard | — | — | Headquarters, Department of the Army; Rockland Manufacturing (read 2026-11-11) |
| Gravel, dry and loose[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 2,835 | 2,700–3,000 | lb per cubic yard | 1.42 | 105 | Headquarters, Department of the Army; Rockland Manufacturing (read 2026-11-11) |
| Gravel, wet[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | — | 2,800–3,375 | lb per cubic yard | — | — | Headquarters, Department of the Army; Rockland Manufacturing (read 2026-11-11) |
| Clay, dry and loose[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 1,836 | 1,700–2,000 | lb per cubic yard | 0.92 | 68 | Headquarters, Department of the Army; Rockland Manufacturing (read 2026-11-11) |
| Hot mix asphalt (compacted), dry and loose[src] Sources: U.S. Navy Equipment Operator Basic training manual (reproduced by Integrated Publishing, tpub.com); Kentucky Transportation Cabinet (proposal text published on BidNet Direct) | 110 | — | lb per square yard per inch | — | — | U.S. Navy Equipment Operator Basic training manual (reproduced by Integrated Publishing, tpub.com); Kentucky Transportation Cabinet (proposal text published on BidNet Direct) (read 2026-11-11) |
| Asphalt millings (RAP), dry and loose[src] Sources: Federal Highway Administration, U.S. Department of Transportation | — | 100–140 | lb per cubic foot | — | — | Federal Highway Administration, U.S. Department of Transportation (read 2026-11-11) |
| Hot mix asphalt, compacted[src] Sources: U.S. Navy Equipment Operator Basic training manual (reproduced by Integrated Publishing, tpub.com) | — | 140–160 | lb per cubic foot | — | — | U.S. Navy Equipment Operator Basic training manual (reproduced by Integrated Publishing, tpub.com) (read 2026-11-11) |
Topsoil uses the weight for “earth (loam or silt)”, because no source found lists topsoil separately. Specific gravel products, such as pea gravel, #57 stone or crusher run, use the general gravel weight; ask your supplier for their own figure. Asphalt millings have no default because the two sources found were far apart, so the asphalt calculator asks for that weight. To turn any volume into tons, use the cubic yards to tons converter.
How much area a cubic yard covers
Coverage is pure arithmetic: a cubic yard is 27 cubic feet, so it covers 27 divided by the depth in feet. The material does not matter.
| Depth (in) | Area covered by 1 yd³ (ft²) | Cubic yards per 100 ft² (yd³) |
|---|---|---|
| 1 | 324 | 0.31 |
| 2 | 162 | 0.62 |
| 3 | 108 | 0.93 |
| 4 | 81 | 1.23 |
| 6 | 54 | 1.85 |
| 12 | 27 | 3.7 |
The what is a cubic yard guide has scale drawings of these areas.
Recommended depths and standard sizes
These depths and sizes come from university extension services, industry associations and manufacturers. The calculators start with the typical value; the range shows what the sources allow.
| Item | Typical (used by calculators) | Published range | Unit | Sources (date read) |
|---|---|---|---|---|
| Mulch depth in beds[src] Sources: University of Illinois Extension; The University of Tennessee Agricultural Extension Service | 3 | 2–4 | inches | University of Illinois Extension; The University of Tennessee Agricultural Extension Service (read 2026-11-11) |
| Topsoil depth for a new lawn[src] Sources: Penn State Extension; New Mexico State University, College of Agricultural, Consumer and Environmental Sciences | 6 | 4–6 | inches | Penn State Extension; New Mexico State University, College of Agricultural, Consumer and Environmental Sciences (read 2026-11-11) |
| Topsoil depth under new sod[src] Sources: Penn State Extension; New Mexico State University, College of Agricultural, Consumer and Environmental Sciences | 6 | 4–6 | inches | Penn State Extension; New Mexico State University, College of Agricultural, Consumer and Environmental Sciences (read 2026-11-11) |
| Raised bed soil depth[src] Sources: Utah State University Extension; University of Georgia Cooperative Extension (CAES Field Report); University of Maryland Extension | 12 | 6–24 | inches | Utah State University Extension; University of Georgia Cooperative Extension (CAES Field Report); University of Maryland Extension (read 2026-11-11) |
| Paver base depth, patio or walkway[src] Sources: Concrete Masonry & Hardscapes Association (CMHA); Unilock | 6 | 4–8 | inches | Concrete Masonry & Hardscapes Association (CMHA); Unilock (read 2026-11-11) |
| Paver base depth, driveway[src] Sources: Concrete Masonry & Hardscapes Association (CMHA); Unilock | 10 | 6–14 | inches | Concrete Masonry & Hardscapes Association (CMHA); Unilock (read 2026-11-11) |
| Paver bedding sand layer[src] Sources: Concrete Masonry & Hardscapes Association (CMHA); Belgard | 1 | — | inches | Concrete Masonry & Hardscapes Association (CMHA); Belgard (read 2026-11-11) |
| Minimum pour thickness for bagged concrete mix[src] Sources: The QUIKRETE Companies; Sakrete (CRH) | 2 | — | inches | The QUIKRETE Companies; Sakrete (CRH) (read 2026-11-11) |
| Sod piece length[src] Sources: Sod Solutions; McCall Sod Farm | 24 | — | inches | Sod Solutions; McCall Sod Farm (read 2026-11-11) |
| Sod piece width[src] Sources: Sod Solutions; McCall Sod Farm | 16 | — | inches | Sod Solutions; McCall Sod Farm (read 2026-11-11) |
| Sod pallet coverage[src] Sources: Purdue Extension; Mississippi State University Extension Service; Sod Solutions; McCall Sod Farm | 450 | 400–500 | square feet | Purdue Extension; Mississippi State University Extension Service; Sod Solutions; McCall Sod Farm (read 2026-11-11) |
Bagged concrete yields
The yield is the volume of mixed concrete one bag makes, printed by the maker. It is not the same as the dry volume of the bag.
| Item | Typical (used by calculators) | Published range | Unit | Sources (date read) |
|---|---|---|---|---|
| Bagged concrete mix, 40 lb bag (yield)[src] Sources: The QUIKRETE Companies; Sakrete (CRH) | 0.3 | — | ft3/bag | The QUIKRETE Companies; Sakrete (CRH) (read 2026-11-11) |
| Bagged concrete mix, 60 lb bag (yield)[src] Sources: The QUIKRETE Companies; Sakrete (CRH) | 0.45 | — | ft3/bag | The QUIKRETE Companies; Sakrete (CRH) (read 2026-11-11) |
| Bagged concrete mix, 80 lb bag (yield)[src] Sources: The QUIKRETE Companies; Sakrete (CRH) | 0.6 | — | ft3/bag | The QUIKRETE Companies; Sakrete (CRH) (read 2026-11-11) |
| Bagged concrete mix, 50 lb bag (yield)[src] Sources: The QUIKRETE Companies | 0.375 | — | ft3/bag | The QUIKRETE Companies (read 2026-11-11) |
| Bagged concrete mix, 90 lb bag (yield)[src] Sources: The QUIKRETE Companies | 0.675 | — | ft3/bag | The QUIKRETE Companies (read 2026-11-11) |
Truck capacities
Truck sizes vary by supplier and by how heavy the material is. These are the published figures the calculators use to count loads.
| Item | Typical (used by calculators) | Published range | Unit | Sources (date read) |
|---|---|---|---|---|
| Single-axle dump truck[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) | 6 | 4–6 | cubic yards | Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) (read 2026-11-11) |
| Tandem-axle dump truck[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) | 12 | 8–14 | cubic yards | Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) (read 2026-11-11) |
| Ready-mix truck mixer[src] Sources: National Ready Mixed Concrete Association (NRMCA) | — | 8–12 | cubic yards | National Ready Mixed Concrete Association (NRMCA) (read 2026-11-12) |
Swell and compaction factors
Soil and stone change volume when they are dug up and when they are packed down. The U.S. Army earthmoving manual gives these factors: “in-ground” is undisturbed material, “loose” is dug or delivered material, and “compacted” is material after rolling or tamping.
| Material | Volume change factors | Source (date read) |
|---|---|---|
| Sand or gravel[src] Sources: Headquarters, Department of the Army | In-ground to loose ×1.11; in-ground to compacted ×0.95; loose to compacted ×0.86 | Headquarters, Department of the Army (read 2026-11-11) |
| Loam (common earth)[src] Sources: Headquarters, Department of the Army | In-ground to loose ×1.25; in-ground to compacted ×0.9; loose to compacted ×0.72 | Headquarters, Department of the Army (read 2026-11-11) |
| Clay[src] Sources: Headquarters, Department of the Army | In-ground to loose ×1.43; in-ground to compacted ×0.9; loose to compacted ×0.63 | Headquarters, Department of the Army (read 2026-11-11) |
For example, a cubic yard dug out of the ground becomes more than a cubic yard in the truck, and a cubic yard of delivered gravel shrinks once it is compacted. The dump truck guide shows how this changes the number of loads.
Published price ranges
Prices change, so each range here carries the month it is dated to. They are national figures for comparison; always get a local quote. The cost guides explain each one.
| Item | Typical (used by calculators) | Published range | Unit | Sources (date read) |
|---|---|---|---|---|
| Ready-mix concrete per cubic yard (as of January 2026)[src] Sources: HomeGuide | — | 119–147 | USD per cubic yard | HomeGuide (read 2026-11-16) |
| Ready-mix concrete per cubic yard (as of July 2026)[src] Sources: ConcreteNetwork.com | — | 160–195 | USD per cubic yard | ConcreteNetwork.com (read 2026-11-16) |
| Ready-mix concrete, national average for 2025 (as of July 2026)[src] Sources: ConcreteNetwork.com | 179.95 | — | USD per cubic yard | ConcreteNetwork.com (read 2026-11-16) |
| Plain concrete poured, per square foot (as of January 2026)[src] Sources: HomeGuide | — | 5–10 | USD per square foot | HomeGuide (read 2026-11-16) |
| Plain concrete slab poured, per square foot (as of July 2026)[src] Sources: ConcreteNetwork.com | — | 6.5–10.5 | USD per square foot | ConcreteNetwork.com (read 2026-11-16) |
| Short-load charge, less than a full truck (as of January 2026)[src] Sources: HomeGuide | 53 | — | USD per cubic yard | HomeGuide (read 2026-11-16) |
| Bulk crushed stone and gravel per ton (as of December 2025)[src] Sources: HomeGuide | — | 10–50 | USD per ton | HomeGuide (read 2026-11-16) |
| Bulk gravel per cubic yard (as of December 2025)[src] Sources: HomeGuide | — | 15–75 | USD per cubic yard | HomeGuide (read 2026-11-16) |
| Gravel delivery per ton (as of December 2025)[src] Sources: HomeGuide | — | 10–25 | USD per ton | HomeGuide (read 2026-11-16) |
| Crushed stone, U.S. average value at the producer (as of February 2026)[src] Sources: U.S. Geological Survey | 18.5 | — | USD per metric ton | U.S. Geological Survey (read 2026-11-16) |
| Construction sand and gravel, U.S. average value at the producer (as of February 2026)[src] Sources: U.S. Geological Survey | 14.5 | — | USD per metric ton | U.S. Geological Survey (read 2026-11-16) |
How the values are chosen and checked
Every value on this page passes the same checks as the rest of the site:
- Recorded source. Each value is stored with the source’s publisher, title, address, the date it was read and the exact wording that states it.
- Two sources for defaults. A value the calculators use as a default needs two independent sources that agree. Where they disagree, only the range is published.
- Automatic tests. A test confirms each default appears in its sources’ recorded wording, and the page is built from that same data, so it cannot drift from the calculators.
- No guesses. If a value could not be verified, it is left out or becomes a field you fill in.
The editorial policy describes the standards in full.
How to cite this reference
You are welcome to use these figures. Please link to this page and name YardCalculator, and credit the original source shown for each value, for example:
YardCalculator, “Landscape Material Weight & Coverage Reference”, yardcalculator.net/guides/material-weight-coverage-reference/
The CSV download lists every source with its address and the date it was read, so you can check or cite the originals directly.