Skip to content

Mulch Calculator

This mulch calculator gives cubic yards or bags at the 2 to 4 inch[src] Sources: University of Illinois Extension; The University of Tennessee Agricultural Extension Service depth extension guides recommend, starting at 3 inches[src] Sources: University of Illinois Extension; The University of Tennessee Agricultural Extension Service.

Area shape

Extension guides recommend 2–4 in.

For uneven ground and spills.

You need

1.85cubic yards

Cubic feet
50 ft³
Cubic meters
1.42 m³

A 20 ft × 10 ft area, 3 in deep, needs 1.85 cubic yards of mulch (50 cubic feet).

Estimate only — confirm quantities with your supplier before ordering.

More options: bags and price

The volume printed on the bag.

A bed 20 × 10 ft at 3 in needs 1.85 cubic yards. Use the Ring tab for tree rings and enter the bag size from your bag label under More options to count bags. Add a bag price and a bulk price to see which costs less: this works as a mulch estimator for any bark, wood chip, pine bark or rubber mulch.

Key facts

How we calculate

Formula

Cubic feet = area (ft²) × depth (in) ÷ 12

Cubic yards = cubic feet ÷ 27

Bags = cubic feet ÷ bag size (ft³), rounded up

Assumptions and defaults

A rectangular area with length, width and depth labelledlengthwidthdepth

How much mulch do I need?

How much mulch you need is the bed area times the depth, converted to cubic yards or bags. Here is how to calculate how much mulch you need step by step:

  1. Measure each bed. Use length × width for rectangles; split curved beds into simple shapes.
  2. Add the bed areas together for total square feet.
  3. Choose a depth. Extension guides recommend 2 to 4 inches[src] Sources: University of Illinois Extension.
  4. Multiply square feet by (depth ÷ 12) to get cubic feet.
  5. Divide cubic feet by 27 for cubic yards, or by your bag size for bags.

For three beds of 40, 60 and 100 square feet, the total is 200 square feet. At 3 inches that is 50 cubic feet, or 1.85 cubic yards.

How to measure for mulch

Use a tape measure and work in feet. For a curved bed, measure the length along the middle and take several widths, then average them. For island beds around trees, measure the diameter of the circle. The cubic yard calculator page explains the formulas for circles, triangles and rings. Take a few depth readings of any old mulch, because new mulch goes on top and the total should stay in range.

How deep should mulch be?

University of Illinois Extension recommends a mulch depth of 2 to 4 inches[src] Sources: University of Illinois Extension, with composted materials at 2 to 3[src] Sources: University of Illinois Extension inches and coarse mulches at 3 to 4[src] Sources: University of Illinois Extension inches. University of Tennessee Extension also says the depth should be no more than 2 to 4 inches[src] Sources: The University of Tennessee Agricultural Extension Service, and warns that more than 4 inches[src] Sources: The University of Tennessee Agricultural Extension Service restricts the oxygen exchange between soil and roots.

Mulch type (Illinois Extension) Depth
Composted materials 2 to 3 inches[src] Sources: University of Illinois Extension
Coarse mulches 3 to 4 inches[src] Sources: University of Illinois Extension
General range, well-drained sites 2 to 4 inches[src] Sources: University of Illinois Extension

If there is old mulch in the bed, measure it first and count it toward the total.

How much does a yard of mulch cover?

A yard of mulch covers 108 square feet at 3 inches, because one cubic yard is 27 cubic feet. At other depths:

Mulch coverage per cubic yard
Depth (in)Area covered by 1 yd³ (ft²)Cubic yards per 100 ft² (yd³)
13240.31
21620.62
31080.93
4811.23
Pure arithmetic: 27 cubic feet ÷ (depth in inches ÷ 12). Rounded to 2 decimals.

How much mulch per square foot?

Each square foot of bed takes 0.25 cubic feet of mulch at 3 inches deep. That is the depth in inches divided by 12. At 2 inches it is 0.17 cubic feet per square foot, and at 4 inches it is 0.33 cubic feet.

How to calculate bark mulch coverage

Bark mulch is calculated the same way as any mulch: coverage in square feet equals cubic feet ÷ (depth ÷ 12). If you have 2 cubic yards of bark, that is 54 cubic feet, which covers 216 square feet at 3 inches deep.

Mulch around trees

For a tree ring, pick the Ring tab. Enter the ring diameter and the trunk clearance in the middle. Illinois Extension says to keep mulch at least 4 inches[src] Sources: University of Illinois Extension away from the trunk, and that a 3-foot[src] Sources: University of Illinois Extension radius ring is the maximum for most trees. Tennessee Extension also says not to pile mulch against tree trunks.

A ring 6 feet across with a 1 foot clear center at 3 inches deep needs 6.87 cubic feet. That is 4 bags that hold 2 cubic feet each.

How many bags of mulch do I need?

To count bags, divide the cubic feet you need by the volume printed on the bag and round up. Enter your bag size under More options and the calculator does this for you. For 50 cubic feet of mulch:

For a full explanation of bag sizes and how many make a cubic yard, see the guide how many bags of mulch in a yard.

Bags vs bulk mulch

Whether bags or bulk costs less depends on your prices and how much you need. Enter the bag size, price per bag and bulk price per cubic yard under More options. The calculator counts bags, prices both options and tells you which is cheaper for your job. Remember to add any delivery fee to the bulk price per yard, or compare totals by hand.

Mulch calculator in yards and square feet

If you know the bed area in square feet, enter it as a rectangle: length = the area, width = 1 foot. For example, a 350 square foot bed at 3 inches needs 3.24 cubic yards. The result shows cubic yards for bulk orders and cubic feet for bags.

Rubber mulch calculator

Rubber mulch is measured the same way as wood mulch: area times depth gives the volume. The difference is the depth you choose and how it is sold. This site has not verified a recommended depth for rubber mulch, so follow the maker’s guidance and enter that depth above. If you buy rubber mulch in bags, enter the cubic feet printed on the bag under More options to get a bag count. If the bag lists only a weight, ask the seller for the volume it covers.

Worked examples

Front foundation bed. A bed 40 feet by 4 feet at 3 inches needs 40 cubic feet, or 1.48 cubic yards.

Refresh on top of old mulch. Old mulch is 1 inch deep and you want 3 inches in total, so add 2 inches. For 300 square feet that is 1.85 cubic yards.

Playground. For deep playground surfacing, enter the depth the surfacing maker or a safety guide specifies; the volume math is the same.

Common mistakes

For the soil under your beds, the soil calculator handles raised beds and containers.

Frequently asked questions

How much mulch do I need?

Multiply the bed area in square feet by the depth in feet and divide by 27 to get cubic yards. A bed 20 feet by 10 feet at 3 inches deep needs 1.85 cubic yards of mulch.

How deep should mulch be?

University of Illinois Extension recommends 2 to 4 inches, and University of Tennessee Extension says no more than 2 to 4 inches. Tennessee adds that more than 4 inches restricts the oxygen exchange between the soil and roots.

How much does a yard of mulch cover?

One cubic yard of mulch covers 162 square feet at 2 inches deep, 108 square feet at 3 inches and 81 square feet at 4 inches.

How many bags of mulch do I need?

Divide the volume in cubic feet by the size printed on the bag and round up. A bed that needs 50 cubic feet takes 25 bags that hold 2 cubic feet each, or 34 bags that hold 1.5 cubic feet.

How much mulch per square foot?

At 3 inches deep, each square foot takes 0.25 cubic feet of mulch. At 2 inches it takes 0.17 cubic feet, and at 4 inches it takes 0.33 cubic feet.

Does rubber mulch need a different calculation?

No. The volume math is the same for any mulch. Enter the depth you plan to use; rubber mulch makers give their own depth guidance, which this site has not verified.

Sources and references

  1. University of Illinois Extension. Tree Care Basics: Proper Mulching Techniques. extension.illinois.edu/sites/default/files/proper_mulching_techniques_infosheet.pdf. Accessed November 11, 2026.
  2. The University of Tennessee Agricultural Extension Service. SP 617 Mulching Your Trees and Landscapes. uthort.tennessee.edu/wp-content/uploads/sites/228/2024/02/SP617-Mulching-your-trees-and-landscapes.pdf. Accessed November 11, 2026.

Update history

  • — First published.