Cubic Yards to Tons Converter
To convert cubic yards to tons, multiply cubic yards by the material’s weight per cubic yard and divide by 2,000. A cubic yard of dry gravel is about 1.42 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing.
You need
1.42tons
- Pounds
- 2,835 lb
- Density used
- 2,835 lb/yd³
- Published range
- 1.35–1.5 tons
- Tons per cubic yard
- 1.42
1 cubic yard of dry gravel weighs about 1.42 tons.
Estimate only — confirm quantities with your supplier before ordering.
So 10 cubic yards of dry gravel is about 14.18 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. Going the other way, a ton of gravel is about 0.71 cubic yards[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing, which answers how many yards are in a ton. Pick your material in the converter, or enter your supplier’s weight as a custom density.
Key facts
1 short ton = 2,000 pounds.
A cubic yard of dry, loose gravel weighs about 2,835 pounds[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing, or 1.42 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing.
A cubic yard of dry sand weighs about 2,700 pounds[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing, or 1.35 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing.
A cubic yard of dry fill dirt weighs about 2,106 pounds[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing, or 1.05 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing.
One ton of dry gravel is about 0.71 cubic yards[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing.
How we calculate
Formula
Tons = cubic yards × weight (lb per yd³) ÷ 2,000
Cubic yards = tons × 2,000 ÷ weight (lb per yd³)
Assumptions and defaults
- Weights are for dry, loose material, the way it sits in a truck or a pile.
Each typical weight is the figure from a published weights table by Rockland Manufacturing, used only where it falls inside the range in the U.S. Army earthmoving manual, FM 5-434. Both are listed in the sources below.
- The range shown with each result uses the Army manual’s low and high weights for that material.
- Topsoil uses the loam (common earth) weight, because the sources do not list topsoil on its own.
Tons are short tons of 2,000 pounds, rounded to two decimals.
How to convert cubic yards to tons
Converting cubic yards to tons takes one multiplication and one division. You need the volume and the weight of one cubic yard of your material.
- Find the volume in cubic yards. If you only have length, width and depth, the cubic yard calculator gives it.
- Look up the weight of one cubic yard of the material, in pounds.
- Multiply cubic yards by that weight to get pounds.
- Divide pounds by 2,000 to get tons.
For example, 6 cubic yards of dry sand at 2,700 pounds[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing per cubic yard is 16,200 pounds[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing, which is 8.1 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. This is what any yards to tons calculator does. The only part that changes from job to job is the weight.
How many cubic yards are in a ton?
How many cubic yards are in a ton depends on how heavy the material is: the lighter it is, the more yards you get per ton. Divide 2,000 by the weight per cubic yard. This table shows one ton and some common order sizes:
| Material | 1 ton (yd³) | 2 tons (yd³) | 5 tons (yd³) | 10 tons (yd³) | 20 tons (yd³) |
|---|---|---|---|---|---|
| Gravel[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 0.71 | 1.41 | 3.53 | 7.05 | 14.11 |
| Sand[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 0.74 | 1.48 | 3.7 | 7.41 | 14.81 |
| Fill dirt[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 0.95 | 1.9 | 4.75 | 9.5 | 18.99 |
| Clay[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 1.09 | 2.18 | 5.45 | 10.89 | 21.79 |
1 ton, how many cubic yards?
One ton of dry gravel is about 0.71 cubic yards[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing, one ton of dry sand about 0.74 cubic yards[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing, and one ton of dry clay about 1.09 cubic yards[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. Wet material packs more weight into each yard, so a ton of wet material takes up less space.
Cubic yards to tons for gravel
Gravel is often priced by the ton, while projects are measured in yards, so this conversion comes up a lot. At the typical dry weight of 2,835 pounds[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing per cubic yard, each cubic yard is about 1.42 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. The Army manual’s range for dry gravel is 2,700 to 3,000[src] Sources: Headquarters, Department of the Army pounds per cubic yard, so a cubic yard can weigh 1.35 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing to 1.5 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing.
How many yards is 5 tons of gravel?
Five tons of dry gravel is about 3.53 cubic yards[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. At the heavy end of the published range it is closer to 3.33 cubic yards[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. The gravel calculator works out how many tons a driveway or path needs.
How many yards of dirt in a ton?
A ton of dry, loose fill dirt is about 0.95 cubic yards[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. The Army manual lists dry earth (loam or silt) at 1,900 to 2,200[src] Sources: Headquarters, Department of the Army pounds per cubic yard, and wet earth at 2,800 to 3,200[src] Sources: Headquarters, Department of the Army. So a ton of wet dirt covers noticeably less than a ton of dry dirt. Ask whether the price is for dry or moist material. The dirt calculator handles fill dirt orders.
Weight of common materials per cubic yard
These are the weights the converter uses. Each typical figure sits inside the Army range for the same material.
| Material | Typical weight (lb/yd³) | Published range (lb/yd³) | Tons per yd³ (tons) |
|---|---|---|---|
| Gravel[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 2,835 | 2,700–3,000 | 1.42 |
| Sand[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 2,700 | 2,600–2,900 | 1.35 |
| Fill dirt (earth, loam or silt)[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 2,106 | 1,900–2,200 | 1.05 |
| Clay[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 1,836 | 1,700–2,000 | 0.92 |
Topsoil is not listed separately in either source, so the converter uses the loam weight for topsoil and says so in its label. For stone products such as #57 stone, crusher run, river rock or rip rap, use the gravel weight as a starting point or enter your supplier’s figure as a custom density.
Tons for common volumes
Use this table to check an order quickly. It multiplies each volume by the typical dry weight.
| Volume (yd³) | Gravel (tons) | Sand (tons) | Fill dirt (tons) | Clay (tons) |
|---|---|---|---|---|
| 1[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 1.42 | 1.35 | 1.05 | 0.92 |
| 2 | 2.84 | 2.7 | 2.11 | 1.84 |
| 3 | 4.25 | 4.05 | 3.16 | 2.75 |
| 5 | 7.09 | 6.75 | 5.27 | 4.59 |
| 8 | 11.34 | 10.8 | 8.42 | 7.34 |
| 10 | 14.18 | 13.5 | 10.53 | 9.18 |
| 12 | 17.01 | 16.2 | 12.64 | 11.02 |
| 14 | 19.85 | 18.9 | 14.74 | 12.85 |
| 20 | 28.35 | 27 | 21.06 | 18.36 |
Why the same yard can weigh different amounts
Weight per cubic yard is not fixed. The Army manual notes that weights “vary with such factors as grain size, moisture content, and degree of compaction.” Three things matter most:
- Moisture. Water fills the gaps between grains. Dry sand is listed at 2,600 to 2,900[src] Sources: Headquarters, Department of the Army pounds per cubic yard and wet sand at 2,800 to 3,100[src] Sources: Headquarters, Department of the Army.
- Compaction. Loose material has air in it. After tamping, the same weight fills less space. The cubic yard calculator page has a loose vs compacted table.
- Grain size. The Army manual lists grain size as one of the factors, which is one reason two gravels can weigh different amounts.
Because of this, the converter shows a published low–high range with every result. Use the typical figure for planning and the high figure if you need to stay under a truck or trailer weight limit.
Using a tonnage calculator to compare prices
Suppliers price some materials per ton and others per cubic yard. To compare them, convert one to the other. If gravel costs a certain amount per ton, multiply that price by 1.42 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing to get a price per cubic yard of dry gravel. Use your local prices. For comparison, the gravel cost per ton guide shows dated published ranges.
Common mistakes
- Using metric tonnes. A metric tonne is 1,000 kilograms, about 2,204.6 pounds, not 2,000. Check which one a quote uses.
- Forgetting moisture. Wet material can weigh more per yard than the dry figure. Ask your supplier.
- Converting bank yards. Material measured in the ground swells when dug. Convert loose yards, which is how it is delivered.
- Treating all stone the same. Different rock types weigh different amounts. A supplier’s own weight beats any average.