Skip to content

Guides

These guides explain the units and quantities behind every calculator on this site: what a cubic yard really looks like, how bags compare with bulk, and how much a truck carries. Each guide answers one question up front, shows the math, and links to the calculator that does the work for you.

Start here

What is a cubic yard? A cubic yard is a cube 3 feet on each side, or 27 cubic feet. The guide has scale drawings of 1, 2, 3, 4 and 10 cubic yards, shows how much ground each one covers at common depths, and compares cubic yards with yards, square yards and cubic meters. Read it first if you are new to ordering bulk material.

How many bags of mulch in a yard? Divide 27 by the cubic feet printed on the bag. The guide has a chart for every common bag volume, how much one bag covers at each depth, and how to decide whether bags or a bulk delivery cost less for your job.

How many yards of dirt in a dump truck? Single-axle trucks normally carry about 6 cubic yards[src] Sources: Texas Department of Transportation and tandem-axle trucks usually hold 12 or 14 cubic yards[src] Sources: Texas Department of Transportation, according to the Texas Department of Transportation. The guide shows what a full load weighs for dirt, topsoil, sand and gravel, and how many loads a job takes.

Quick reference

These are the conversions that come up most often. They are exact unit definitions, so they never change.

From To Multiply by
Cubic yards Cubic feet 27
Cubic feet Cubic yards 1/27 (about 0.037)
Cubic yards Cubic meters 0.7646
Square yards Square feet 9
Inches of depth Feet of depth 1/12
Short tons Pounds 2,000

And one rule of thumb that is pure arithmetic: one cubic yard covers 324 square feet at 1 inch deep. Divide 324 by any depth in inches to get the coverage at that depth.

Glossary of ordering terms

Suppliers, contractors and product labels use a handful of terms that are easy to mix up. Here is what each one means on this site.

Cubic yard (yd³, cu yd, cy)

A volume 3 feet long, wide and deep: 27 cubic feet. When you order “a yard” of dirt, gravel or mulch, this is what you get.

Cubic foot (ft³, cu ft, cf)

A volume 1 foot on each side. Bags of soil, mulch and concrete mix list their volume in cubic feet.

Square yard (yd², sq yd)

A flat area 3 feet by 3 feet, or 9 square feet. Sod, flooring and paving rates are sometimes given per square yard.

Loose cubic yard

Material as it sits in a truck or a pile, with air between the pieces. Calculators on this site give loose cubic yards, because that is how material is delivered.

Bank (in-place) cubic yard

Material as it sits in the ground before digging. The U.S. Army earthmoving manual says one in-ground cubic yard of loam becomes about 1.25[src] Sources: Headquarters, Department of the Army loose cubic yards once dug.

Compacted cubic yard

Material after tamping or rolling. One loose cubic yard of sand or gravel compacts to about 0.86[src] Sources: Headquarters, Department of the Army cubic yard, according to the same manual.

Short ton

The US ton: 2,000 pounds. A metric tonne is 1,000 kilograms, about 2,204.6 pounds.

Weight per cubic yard (density)

How many pounds one cubic yard of a material weighs. It changes with moisture and grain size. Dry, loose gravel is about 2,835 pounds[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing.

Coverage
How much area a volume covers at a given depth. Coverage in square feet = cubic feet ÷ depth in feet.
Bag yield

The volume a bag of concrete mix makes once mixed and placed, printed by the maker. It is not the same as the dry bag size.

Spread rate

Asphalt quantity per square yard per inch of compacted depth. The U.S. Navy manual and the Kentucky Transportation Cabinet both use 110[src] Sources: U.S. Navy Equipment Operator Basic training manual (reproduced by Integrated Publishing, tpub.com); Kentucky Transportation Cabinet (proposal text published on BidNet Direct) pounds per square yard per inch.

Truckload
One delivery. Its size depends on the truck and the material’s weight; ask your supplier what they load.

Which calculator do I need?

Your project Calculator
Any loose material, any shape Cubic yard calculator
Filling holes, raising a grade Dirt calculator
New lawn or leveling Topsoil calculator
Raised beds and pots Soil calculator
Beds and tree rings Mulch calculator
Driveways and paths Gravel calculator
River rock and landscape stone Stone calculator
Sandboxes and paver bedding Sand calculator
New lawn from sod Sod calculator
Patios and paver driveways Paver calculator
Slabs, footings and posts Concrete calculator
Asphalt driveways and patches Asphalt calculator
Areas in square yards Square yard calculator
Cubic feet ↔ cubic yards Cubic feet to cubic yards
Cubic yards ↔ tons Cubic yards to tons

Quick answers

How many cubic feet in a cubic yard? 27. Divide cubic feet by 27 for cubic yards; the cubic feet to cubic yards converter does it for you.

How much does a cubic yard cover? 108 square feet at 3 inches deep and 162 square feet at 2 inches.

How many bags make a cubic yard? 27 divided by the bag size: 13.5 bags holding 2 cubic feet each.

How much does a cubic yard weigh? It depends on the material. Dry gravel is about 1.42 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing and dry fill dirt about 1.05 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing per cubic yard. The cubic yards to tons converter covers more materials.

How many yards in a dump truck? About 6[src] Sources: Texas Department of Transportation in a single-axle truck and 12 or 14[src] Sources: Texas Department of Transportation in a tandem.

How do square yards relate to cubic yards? A square yard is a flat area of 9 square feet; a cubic yard adds depth. The square yard calculator converts between them at any depth.

How deep should mulch be? University of Illinois Extension recommends 2 to 4 inches[src] Sources: University of Illinois Extension; the mulch calculator starts at the middle of that range.

How these guides are checked

Every number in these guides is either an exact unit definition, worked out by the same tested code as the calculators, or taken from a source listed at the bottom of each page: government agencies, university extension services, industry associations and manufacturers. Where sources disagree, the guide says so and shows the range. Prices are not published in these guides, because they change by region and season. The cost guides show dated price ranges from named sources, and each calculator has a field for your own local price.

Sources and references

  1. University of Illinois Extension. Tree Care Basics: Proper Mulching Techniques. extension.illinois.edu/sites/default/files/proper_mulching_techniques_infosheet.pdf. Accessed November 11, 2026.
  2. Headquarters, Department of the Army. FM 5-434 Earthmoving Operations, Table 1-2. Material Weight, Swell Percentages, and Load Factors. vulcanhammer.net/wp-content/uploads/2017/01/fm5_434.pdf. Accessed November 11, 2026.
  3. Rockland Manufacturing. Weights of Materials. rocksi.rocklandmfg.com/desktop/assets/Rockland-Weights-of-Materials.pdf. Accessed November 11, 2026.
  4. Texas Department of Transportation. Seal Coat and Surface Treatment Manual, Section 5: Haul Trucks — Size. www.txdot.gov/manuals/mnt/scm/equipment_inspection/haul_trucks-i1008556/size-i1008586.html. Accessed November 11, 2026.
  5. U.S. Navy Equipment Operator Basic training manual (reproduced by Integrated Publishing, tpub.com). Compute Plant-Mix Materials. tpub.com/eqopbas/233.htm. Accessed November 11, 2026.
  6. Kentucky Transportation Cabinet (proposal text published on BidNet Direct). US 150 (150) — Bid Information — Commonwealth of Kentucky, Kentucky Transportation Cabinet (KYTC). www.bidnetdirect.com/public/supplier/solicitations/statewide/443602686416/abstract. Accessed November 11, 2026.

Update history

  • — First published.