How Big Is 10 Cubic Yards?
Ten cubic yards is 270 cubic feet, a box 10 feet long, 9 feet wide and 3 feet high. Spread 3 inches deep, 10 cubic yards covers 1,080 square feet, about a 33 × 33 foot square.
Key facts
10 cubic yards = 270 cubic feet = 7.65 cubic meters.
Dry weight: about 10.5 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing of fill dirt, 14.2 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing of gravel.
More than one single-axle load of 6 cubic yards[src] Sources: Texas Department of Transportation, less than a tandem load of 12 or 14 cubic yards[src] Sources: Texas Department of Transportation.
In concrete, about one ready-mix truck: mixers hold 8 to 12 cubic yards[src] Sources: National Ready Mixed Concrete Association (NRMCA).
How big is 10 cubic yards?
Ten cubic yards fills a box with a 9 × 10 foot footprint, stacked 3 feet deep. In the scale drawing the single cubic yard beside it looks tiny, which is the point: 10 yards is ten of those cubes. As a delivered pile it spreads wider and lower, so plan a drop spot that can take a mound several feet across.
At this size, the question is rarely “how big” and more often “how many trucks and how heavy”. Ten yards of gravel weighs more than 14 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing, and it covers 810 square feet at 4 inches deep.
| Unit | Equal to |
|---|---|
| Cubic feet | 270 |
| Cubic meters | 7.646 |
| Liters | 7,646 |
| Cubic inches | 466,560 |
| One-yard cubes (3 × 3 × 3 ft) | 10 |
How much area 10 cubic yards covers
Ten cubic yards spreads over a large area even at working depths:
| Depth (in) | Area (ft²) | Area (yd²) | Square of about |
|---|---|---|---|
| 2 | 1,620 | 180 | 40 × 40 ft |
| 3 | 1,080 | 120 | 33 × 33 ft |
| 4 | 810 | 90 | 28 × 28 ft |
| 6 | 540 | 60 | 23 × 23 ft |
In practical shapes at 4 inches: a gravel driveway 12 feet wide and 67.5 feet long, or a rear parking area about 27 × 30 feet. The gravel calculator gives tons and loads for any driveway. For other shapes and materials, the cubic yard calculator does the same math.
Projects sized for 10 cubic yards
Ten yards is a whole-yard project: a new lawn, a full driveway resurface, or regrading. At the depths this site’s calculators use:
| Project | Depth used (in) | Area covered (ft²) |
|---|---|---|
| New lawn topsoil[src] Sources: Penn State Extension; New Mexico State University, College of Agricultural, Consumer and Environmental Sciences | 6 | 540 |
| Mulch in beds[src] Sources: University of Illinois Extension; The University of Tennessee Agricultural Extension Service | 3 | 1,080 |
| Paver patio base[src] Sources: Concrete Masonry & Hardscapes Association (CMHA); Unilock | 6 | 540 |
| Raised beds, 4 × 8 ft (example size)[src] Sources: Utah State University Extension; University of Georgia Cooperative Extension (CAES Field Report); University of Maryland Extension | 12 | 8.4 beds |
Topsoil for a new lawn at 6 inches[src] Sources: Penn State Extension; New Mexico State University, College of Agricultural, Consumer and Environmental Sciences covers 540 square feet, about a 23 × 23 foot yard. Fill dirt to raise a low area 6 inches covers the same. For bigger lawns, the topsoil calculator sizes the full area.
What 10 cubic yards weighs
Ten cubic yards of dry material weighs about 9.2 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing to 14.2 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing:
| Material | Typical dry weight (lb) | Typical dry (tons) | Dry range (tons) | Wet range (tons) |
|---|---|---|---|---|
| Fill dirt[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 21,060 | 10.53 | 9.5–11 | 13.5–16 |
| Topsoil[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 21,060 | 10.53 | 9.5–11 | — |
| Sand[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 27,000 | 13.5 | 13–14.5 | 14–16.2 |
| Gravel[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 28,350 | 14.18 | 13.5–15 | 14–16.9 |
| Clay[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 18,360 | 9.18 | 8.5–10 | — |
Wet weight matters more at this scale. Ten yards of wet fill dirt can weigh up to 16 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing, and wet gravel up to 17 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. If your supplier loads by weight, wet material gives you fewer yards per ton, so ask how they load. Convert other amounts with the cubic yards to tons converter.
10 cubic yards in bags
Ten cubic yards is 135 bags of 2 cubic feet. Few people would choose bags at that count; this table is mostly useful for comparing a bag price against a bulk quote.
| Bag | Bags needed |
|---|---|
| 0.75 cu ft bag (soil, mulch) | 360 |
| 1 cu ft bag (soil, mulch) | 270 |
| 1.5 cu ft bag (soil, mulch) | 180 |
| 2 cu ft bag (soil, mulch) | 135 |
| 3 cu ft bag (soil, mulch) | 90 |
| 40 lb bag of concrete mix[src] Sources: The QUIKRETE Companies; Sakrete (CRH) | 900 |
| 60 lb bag of concrete mix[src] Sources: The QUIKRETE Companies; Sakrete (CRH) | 600 |
| 80 lb bag of concrete mix[src] Sources: The QUIKRETE Companies; Sakrete (CRH) | 450 |
For concrete, 10 yards is 450 bags[src] Sources: The QUIKRETE Companies; Sakrete (CRH) of 80 lb mix, which is not a realistic hand-mixed pour. HomeGuide prices a full ready-mix load at about 10 cubic yards[src] Sources: HomeGuide, and the National Ready Mixed Concrete Association says mixers hold 8 to 12 cubic yards[src] Sources: National Ready Mixed Concrete Association (NRMCA): 1[src] Sources: National Ready Mixed Concrete Association (NRMCA) to 2 trucks[src] Sources: National Ready Mixed Concrete Association (NRMCA) depending on mixer size. Current per-yard prices are on the concrete cost per yard page.
How many truckloads is 10 cubic yards?
Ten cubic yards fits on one tandem-axle truck, or takes two single-axle loads:
| Truck | Typical bed (yd³) | Loads |
|---|---|---|
| Single-axle dump truck[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) | 6 | 2 |
| Tandem-axle dump truck[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) | 12 | 1 |
When the 10 yards is coming out of the ground instead, plan for swell. The U.S. Army earthmoving manual’s factor turns 10 cubic yards of in-ground loam into about 12.5 loose cubic yards[src] Sources: Headquarters, Department of the Army: 2 tandem loads[src] Sources: Headquarters, Department of the Army; Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) rather than one. The guide to how many yards fit in a dump truck explains truck sizes.
Ordering 10 cubic yards
- Compaction. For a compacted base, order loose volume: 11.63 loose cubic yards[src] Sources: Headquarters, Department of the Army of sand or gravel compacts to 10 yards by the Army manual’s factor.
- Access. A tandem truck needs room to back in and raise its bed. Check overhead wires and soft ground at the drop spot.
- Split deliveries. Ten yards of one material can arrive on one tandem, or two single-axle trips if access is tight.
Nearby sizes: 5 cubic yards and 20 cubic yards.