How Big Is 3 Cubic Yards?
Three cubic yards is 81 cubic feet: a box 3 feet wide, 3 feet tall and 9 feet long. Spread 3 inches deep, 3 cubic yards covers 324 square feet, about an 18 × 18 foot square.
Key facts
3 cubic yards = 81 cubic feet = 2.294 cubic meters.
It covers 486 ft² at 2 in, 324 ft² at 3 in and 243 ft² at 4 in deep.
Dry gravel: about 4.25 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. Dry fill dirt: about 3.16 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing.
It is about half of a single-axle dump truck, which normally carries 6 cubic yards[src] Sources: Texas Department of Transportation.
How big is 3 cubic yards?
Three cubic yards is three one-yard cubes in a row. Each cube is 3 feet on a side, so the row makes a box 3 feet wide, 3 feet tall and 9 feet long. The drawing above shows that box beside a single cubic yard at the same scale.
A delivered load never sits in a neat box. Loose dirt, mulch or gravel slumps into a mound that is wider and lower than the box, so a three-yard pile takes up more of your driveway than the numbers suggest. Leave room for it, and for a wheelbarrow path around it.
Spread out, 3 cubic yards becomes a much bigger shape. At 3 inches deep it is a square about 18 feet on each side. At 6 inches deep the square shrinks to about 13 feet on a side, because the same volume is stacked twice as deep.
| Unit | Equal to |
|---|---|
| Cubic feet | 81 |
| Cubic meters | 2.294 |
| Liters | 2,294 |
| Cubic inches | 139,968 |
| One-yard cubes (3 × 3 × 3 ft) | 3 |
How much area does 3 cubic yards cover?
Coverage depends only on depth: divide the 81 cubic feet by the depth in feet. Halve the depth and the area doubles.
| Depth (in) | Area (ft²) | Area (yd²) | Square of about |
|---|---|---|---|
| 2 | 486 | 54 | 22 × 22 ft |
| 3 | 324 | 36 | 18 × 18 ft |
| 4 | 243 | 27 | 16 × 16 ft |
| 6 | 162 | 18 | 13 × 13 ft |
Rectangles are easier to picture than squares. At 3 inches, the 324 square feet could be a bed 8 feet wide and about 41 feet long, or a path 4 feet wide and 81 feet long. Measure your area, then check it against the row for your depth. The cubic yard calculator does the reverse: enter your area and depth and it gives the cubic yards.
What can you do with 3 cubic yards?
Three cubic yards is a typical amount for one or two landscape jobs around a house. Here is what it covers at the depths this site’s calculators use, each taken from extension or industry guides:
| Project | Depth used (in) | Area covered (ft²) |
|---|---|---|
| New lawn topsoil[src] Sources: Penn State Extension; New Mexico State University, College of Agricultural, Consumer and Environmental Sciences | 6 | 162 |
| Mulch in beds[src] Sources: University of Illinois Extension; The University of Tennessee Agricultural Extension Service | 3 | 324 |
| Paver patio base[src] Sources: Concrete Masonry & Hardscapes Association (CMHA); Unilock | 6 | 162 |
| Raised beds, 4 × 8 ft (example size)[src] Sources: Utah State University Extension; University of Georgia Cooperative Extension (CAES Field Report); University of Maryland Extension | 12 | 2.5 beds |
As mulch, 3 cubic yards covers 324 square feet of beds at the 3 inch[src] Sources: University of Illinois Extension; The University of Tennessee Agricultural Extension Service depth the mulch calculator starts with. As lawn topsoil at 6 inches[src] Sources: Penn State Extension; New Mexico State University, College of Agricultural, Consumer and Environmental Sciences, it covers 162 square feet, enough for a small front-yard patch; the topsoil calculator sizes a full lawn. In 4-by-8 foot raised beds filled 12 inches[src] Sources: Utah State University Extension; University of Georgia Cooperative Extension (CAES Field Report); University of Maryland Extension deep, it fills about 2.5 beds.
How much does 3 cubic yards weigh?
Three cubic yards weighs anywhere from about 2.8 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing of dry clay to about 4.3 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing of dry gravel. The weight matters for two decisions: whether a trailer or truck can carry it, and how a supplier who sells by the ton will price it.
| Material | Typical dry weight (lb) | Typical dry (tons) | Dry range (tons) | Wet range (tons) |
|---|---|---|---|---|
| Fill dirt[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 6,318 | 3.16 | 2.9–3.3 | 4.1–4.8 |
| Topsoil[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 6,318 | 3.16 | 2.9–3.3 | — |
| Sand[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 8,100 | 4.05 | 3.9–4.4 | 4.2–4.9 |
| Gravel[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 8,505 | 4.25 | 4.1–4.5 | 4.2–5.1 |
| Clay[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing | 5,508 | 2.75 | 2.6–3 | — |
Water adds weight fast. The same 3 yards of sand weighs 4.1 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing dry, but the wet range runs to 4.9 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing. If you are hauling it yourself, check the load rating of your trailer against the wet figure, not the dry one. To convert any other amount, use the cubic yards to tons converter.
3 cubic yards in bags
Three cubic yards is 41 bags of 2 cubic feet. That many bags is a real job to buy, load, carry and open, which is why most people order bulk at this size.
| Bag | Bags needed |
|---|---|
| 0.75 cu ft bag (soil, mulch) | 108 |
| 1 cu ft bag (soil, mulch) | 81 |
| 1.5 cu ft bag (soil, mulch) | 54 |
| 2 cu ft bag (soil, mulch) | 41 |
| 3 cu ft bag (soil, mulch) | 27 |
| 40 lb bag of concrete mix[src] Sources: The QUIKRETE Companies; Sakrete (CRH) | 270 |
| 60 lb bag of concrete mix[src] Sources: The QUIKRETE Companies; Sakrete (CRH) | 180 |
| 80 lb bag of concrete mix[src] Sources: The QUIKRETE Companies; Sakrete (CRH) | 135 |
For concrete, 3 cubic yards is 135 bags[src] Sources: The QUIKRETE Companies; Sakrete (CRH) of 80 lb mix. At that volume, ready-mix delivered by truck is the usual choice; the concrete calculator compares both at your prices.
How many truckloads is 3 cubic yards?
Three cubic yards fits in one load of either common dump truck, with room to spare.
| Truck | Typical bed (yd³) | Loads |
|---|---|---|
| Single-axle dump truck[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) | 6 | 1 |
| Tandem-axle dump truck[src] Sources: Texas Department of Transportation; Kentucky Transportation Cabinet Highway Knowledge Portal (Kentucky Transportation Center, University of Kentucky) | 12 | 1 |
Because a single-axle truck normally carries 6 cubic yards[src] Sources: Texas Department of Transportation, many suppliers can deliver 3 yards of one material and 3 of another on the same trip. Ask whether yours can split a load. The guide to how many yards fit in a dump truck has more on truck sizes.
Ordering 3 cubic yards: what to check
- Settling and compaction. Loose material shrinks when it is packed down. The U.S. Army earthmoving manual gives a factor that turns 3 loose cubic yards of sand or gravel into about 2.58 compacted cubic yards[src] Sources: Headquarters, Department of the Army. If you need 3 yards after compacting, order about 3.49 loose cubic yards[src] Sources: Headquarters, Department of the Army.
- Depth in inches. Measure depth in inches and divide by 12. Entering 3 feet instead of 3 inches makes an order twelve times too big.
- A little extra. Uneven ground uses more than the math says. Round up rather than down.
Need a size close to this one? See 2 cubic yards for a smaller job or 4 cubic yards for a larger one.