Skip to content

10x10 Concrete Slab Cost

10x10 concrete slab cost at 4 in thick: 1.23 yd³ of concrete, $147[src] Sources: HomeGuide to $241[src] Sources: ConcreteNetwork.com at 2026[src] Sources: HomeGuide; ConcreteNetwork.com prices.

What do you know?

Try 5 or 6 in too.

Your supplier's quote.

At published national prices

$147–$241

Cubic yards
1.23 yd³
At HomeGuide range (January 2026)
$147–$181
At ConcreteNetwork.com range (July 2026)
$198–$241

At the published national price ranges, 1.23 cubic yards of concrete costs about $147 to $241. Enter your supplier's price per cubic yard for your own total.

Prices vary by region, season and supplier. Published ranges are for comparison only.

Estimate only — confirm quantities with your supplier before ordering.

More options: fees and extra

Delivery, short-load or Saturday charges.

Added to the amount before pricing.

The calculator starts at 10 × 10 ft and 4 in thick. Change the thickness to see 5 or 6 inches, and type your supplier’s price per cubic yard for your own total and cost per square foot.

Key facts

10 × 10 ft slab drawn to scale against the other slab sizes, on a 10 ft grid10 ft10 ftgrid: 10 ft squares
The 10 × 10 ft slab (100 square feet), shaded, with the other slab sizes on this site dashed for comparison. Drawn to scale on a 10 ft grid.

How much concrete does a 10x10 slab need?

A ten-by-ten slab covers 100 square feet, the smallest size in this set. Its concrete volume is that area times the thickness in feet, divided by 27:

Concrete for a 10 × 10 ft slab, by thickness
Thickness (in)Volume (ft³)Volume (yd³)With 5% extra (yd³)With 10% extra (yd³)
4[src] Sources: HomeGuide33.31.231.31.36
5[src] Sources: HomeGuide41.71.541.621.7
6[src] Sources: HomeGuide501.851.942.04
100 ft² × thickness ÷ 12 ÷ 27. HomeGuide suggests adding 5% to 10% for waste and spills.

At 4 inches the slab is 33.3 cubic feet. Each extra inch adds 0.31 cubic yards. HomeGuide’s own price table uses a 10x10 shed slab as an example at 1.85[src] Sources: HomeGuide cubic yards, which matches a 6 inch thickness (1.85 cubic yards).

How much does a 10x10 concrete slab cost?

The concrete alone for a 10x10 slab costs a few hundred dollars at published ready-mix prices. Here it is at both ranges and all three thicknesses:

Ready-mix concrete cost for a 10 × 10 ft slab at published prices
Thickness (in)Volume (yd³)At HomeGuide range (January 2026)At ConcreteNetwork.com range (July 2026)Short-load charge (January 2026)
4[src] Sources: HomeGuide; ConcreteNetwork.com1.23$147 – $181$198 – $241+ $65
5[src] Sources: HomeGuide; ConcreteNetwork.com1.54$184 – $227$247 – $301+ $82
6[src] Sources: HomeGuide; ConcreteNetwork.com1.85$220 – $272$296 – $361+ $98
Concrete only, before tax, labor, forms, base and reinforcement. HomeGuide prices a full truck at about 10 cubic yards and adds a short-load charge below that; ask your supplier where their short load stops.

Because the slab needs well under a full truck, expect a short-load charge. HomeGuide says less than a full truckload adds $53 per cubic yard[src] Source: HomeGuide, which at 4 inches takes HomeGuide’s low-end total to about $212[src] Sources: HomeGuide. Some suppliers instead set a minimum order; ask before you book.

A finished pad costs more than the concrete. Poured and finished, plain concrete runs $5 to $10 per square foot (HomeGuide, as of January 2026)[src] Source: HomeGuide and $6.50 to $10.50 per square foot (ConcreteNetwork.com, as of July 2026)[src] Source: ConcreteNetwork.com. For 100 square feet that is $500[src] Sources: HomeGuide to $1,050[src] Sources: ConcreteNetwork.com for the cost for a 10x10 concrete pad that someone else forms, pours and finishes.

Bags or ready-mix for a 10x10 slab?

A 10x10 slab is the size where bagged concrete is still realistic. At 4 inches it takes 56 bags[src] Sources: The QUIKRETE Companies; Sakrete (CRH) of 80 lb mix:

Bags of concrete mix for a 10 × 10 ft slab
Thickness (in)40 lb bags60 lb bags80 lb bags
4[src] Sources: The QUIKRETE Companies; Sakrete (CRH)1127556
5[src] Sources: The QUIKRETE Companies; Sakrete (CRH)1399370
6[src] Sources: The QUIKRETE Companies; Sakrete (CRH)16711284
Volume ÷ the yield Quikrete and Sakrete print for each bag, rounded up. No extra included.

To compare, find the bag price at which bags and ready-mix cost the same. With HomeGuide’s low-end price plus its short-load charge, ready-mix comes to $172[src] Sources: HomeGuide per yard, so bags win only below $3.82[src] Sources: HomeGuide; The QUIKRETE Companies; Sakrete (CRH) for an 80 lb bag. Mixing that many bags by hand also means a long, steady pour; a rented mixer helps. The concrete calculator compares both at your prices.

Reinforcement for a 10x10 slab

ConcreteNetwork.com writes that “Reinforcement is required because all concrete cracks, so if you want your cracks to remain small, you’ll need reinforcement.”[src] Sources: ConcreteNetwork.com It lists wire mesh, rebar, plastic mesh and fiber in the mix as the common options. Which one a small pad needs depends on what sits on it and on local building rules, so check with your building department before you pour.

What else a 10x10 pad needs

The concrete is only part of the job. ConcreteNetwork.com lists the other pieces of a concrete price as grading, the subbase, forms and finishing, and reinforcement:

Compare other slab sizes

A 12x12 slab covers 144 square feet, and a 10x20 slab doubles it. For any other shape, use the concrete calculator; current per-yard prices are on the concrete cost per yard page.

Frequently asked questions

How much concrete do I need for a 10x10 slab?

A 10x10 slab is 100 square feet. At 4 inches thick it needs 1.23 cubic yards; at 6 inches, 1.85 cubic yards. Add 5% to 10% for waste, as HomeGuide suggests.

What is the cost for a 10x10 concrete pad?

The concrete for a 4 inch pad costs about $147 to $241 at published ready-mix ranges, before any short-load charge. Poured and finished, plain concrete runs $5 to $10 per square foot (HomeGuide), or $500 to $1,000 for 100 square feet.

How many bags of concrete for a 10x10 slab?

At 4 inches thick: 56 bags of 80 lb mix or 75 bags of 60 lb mix, using Quikrete and Sakrete yields.

Is it cheaper to use bags for a 10x10 slab?

Only if bags are cheap. With HomeGuide's short-load charge added, ready-mix costs $172 a yard at the low end, so an 80 lb bag has to cost less than $3.82 for bags to win.

Does a 10x10 slab need rebar?

ConcreteNetwork.com says reinforcement keeps cracks small and lists wire mesh, rebar, plastic mesh and fiber as common choices. What a slab needs depends on its use and local code; ask your building department or contractor.

Sources and references

  1. HomeGuide. How Much Does Concrete Cost Per Yard? (2026). homeguide.com/costs/concrete-prices. Accessed November 16, 2026.
  2. ConcreteNetwork.com. Concrete Price Considerations - Cost of Concrete. www.concretenetwork.com/concrete-prices.html. Accessed November 16, 2026.
  3. The QUIKRETE Companies. QUIKRETE Concrete Mix, Product No. 1101 — Data Sheet. www.quikrete.com/PDFs/DATA_SHEET-Concrete%20Mix%201101.pdf. Accessed November 11, 2026.
  4. Sakrete (CRH). High-Strength Concrete Mix (4,000 PSI) | Sakrete. www.sakrete.com/product/high-strength-concrete-mix/. Accessed November 11, 2026.
  5. National Ready Mixed Concrete Association (NRMCA). CIP 31 — Ordering Ready Mixed Concrete. www.nrmca.org/wp-content/uploads/2021/01/31pr.pdf. Accessed November 12, 2026.

Prices checked November 16, 2026. Prices are reviewed every 90 days; next review due February 14, 2027.

Update history

  • — First published.