Skip to content

10x20 Concrete Slab Cost

10x20 concrete slab cost at 4 in thick: 2.47 yd³ of concrete, $294[src] Sources: HomeGuide to $481[src] Sources: ConcreteNetwork.com at 2026[src] Sources: HomeGuide; ConcreteNetwork.com prices.

What do you know?

Try 5 or 6 in too.

Your supplier's quote.

At published national prices

$294–$481

Cubic yards
2.47 yd³
At HomeGuide range (January 2026)
$294–$363
At ConcreteNetwork.com range (July 2026)
$395–$481

At the published national price ranges, 2.47 cubic yards of concrete costs about $294 to $481. Enter your supplier's price per cubic yard for your own total.

Prices vary by region, season and supplier. Published ranges are for comparison only.

Estimate only — confirm quantities with your supplier before ordering.

More options: fees and extra

Delivery, short-load or Saturday charges.

Added to the amount before pricing.

The calculator opens at 20 × 10 ft and 4 in. Enter the price your ready-mix plant quotes per cubic yard to see your total, and add delivery or short-load fees under More options.

Key facts

10 × 20 ft slab drawn to scale against the other slab sizes, on a 10 ft grid20 ft10 ftgrid: 10 ft squares
The 10 × 20 ft slab (200 square feet), shaded, with the other slab sizes on this site dashed for comparison. Drawn to scale on a 10 ft grid.

How much concrete for a 10x20 slab?

A 10x20 slab is twice the area of a 10x10, so it needs twice the concrete at any thickness:

Concrete for a 10 × 20 ft slab, by thickness
Thickness (in)Volume (ft³)Volume (yd³)With 5% extra (yd³)With 10% extra (yd³)
4[src] Sources: HomeGuide66.72.472.592.72
5[src] Sources: HomeGuide83.33.093.243.4
6[src] Sources: HomeGuide1003.73.894.07
200 ft² × thickness ÷ 12 ÷ 27. HomeGuide suggests adding 5% to 10% for waste and spills.

The long, narrow shape changes the work more than the volume. The perimeter is 60 feet, against 40 feet for a 10x10, so there is half again as much form board and edge to finish for twice the area.

10x20 concrete slab cost

At the published ready-mix ranges, the concrete for a 10x20 slab costs:

Ready-mix concrete cost for a 10 × 20 ft slab at published prices
Thickness (in)Volume (yd³)At HomeGuide range (January 2026)At ConcreteNetwork.com range (July 2026)Short-load charge (January 2026)
4[src] Sources: HomeGuide; ConcreteNetwork.com2.47$294 – $363$395 – $481+ $131
5[src] Sources: HomeGuide; ConcreteNetwork.com3.09$367 – $454$494 – $602+ $164
6[src] Sources: HomeGuide; ConcreteNetwork.com3.7$441 – $544$593 – $722+ $196
Concrete only, before tax, labor, forms, base and reinforcement. HomeGuide prices a full truck at about 10 cubic yards and adds a short-load charge below that; ask your supplier where their short load stops.

At 4 inches the slab needs about a quarter of the full truck of about 10 cubic yards[src] Sources: HomeGuide HomeGuide prices, so a short-load charge is likely. Adding HomeGuide’s $53 per cubic yard[src] Source: HomeGuide to its low-end price gives about $425[src] Sources: HomeGuide for the concrete.

For a finished slab, use the per-square-foot prices: $5 to $10 per square foot (HomeGuide, as of January 2026)[src] Source: HomeGuide or $6.50 to $10.50 per square foot (ConcreteNetwork.com, as of July 2026)[src] Source: ConcreteNetwork.com. For 200 square feet that is $1,000[src] Sources: HomeGuide to $2,100[src] Sources: ConcreteNetwork.com across both sources.

Bags for a 10x20 slab

Bagged concrete for a 10x20 slab means more than a hundred bags at most thicknesses:

Bags of concrete mix for a 10 × 20 ft slab
Thickness (in)40 lb bags60 lb bags80 lb bags
4[src] Sources: The QUIKRETE Companies; Sakrete (CRH)223149112
5[src] Sources: The QUIKRETE Companies; Sakrete (CRH)278186139
6[src] Sources: The QUIKRETE Companies; Sakrete (CRH)334223167
Volume ÷ the yield Quikrete and Sakrete print for each bag, rounded up. No extra included.

Ready-mix wins on price whenever an 80 lb bag costs more than $3.82[src] Sources: HomeGuide; The QUIKRETE Companies; Sakrete (CRH), the break-even against HomeGuide’s low price plus its short-load charge. With that many bags there is also a timing problem: the whole slab should be placed in one go, and HomeGuide warns: “Pouring twice may produce a “cold seam” between the concrete that will cause you to start over.”[src] Sources: HomeGuide Ready-mix arrives all at once.

Ordering concrete for a 10x20 slab

  1. Decide the thickness with your contractor or building department, then read the yards from the table above.
  2. Add extra. HomeGuide suggests 5% to 10%[src] Sources: HomeGuide for waste and spills.
  3. Ask the plant for the delivered price per yard, the short-load charge and any distance charge. HomeGuide reports about $9.50 per mile[src] Sources: HomeGuide beyond 20 miles[src] Sources: HomeGuide.
  4. Enter the price and fees in the calculator above to check the total.

Base and reinforcement

Most slabs sit on compacted gravel. For an example base 4 inches deep, a 10x20 area takes 2.47 cubic yards of gravel before compaction; the gravel calculator converts that to tons. ConcreteNetwork.com lists the subbase as “Cost for gravel or sand delivered to the job site.”[src] Sources: ConcreteNetwork.com

On reinforcement, ConcreteNetwork.com says it keeps cracks small and names wire mesh, rebar, plastic mesh and fiber as the common choices. Local building rules decide what a given slab needs.

Squaring the forms for a 10x20 slab

Forms are square when both diagonals measure the same. For a 10x20 slab each diagonal should be 22.36 feet, or about 22 feet 4.3 inches. Measure corner to corner both ways before staking; if the two numbers differ, nudge the long sides until they match. A long, narrow form racks out of square easily, so check again after the boards are fastened.

What each extra inch adds

On 200 square feet, every inch of thickness is 0.62 cubic yards of concrete, worth $73[src] Sources: HomeGuide to $120[src] Sources: ConcreteNetwork.com at published ready-mix ranges. Going from 4 to 6 inches adds 1.23 cubic yards.

Compare sizes

Half the area: the 10x10 slab. Twice the area: the 20x20 slab. Other shapes: the concrete calculator. Prices per yard with dates: concrete cost per yard.

Frequently asked questions

How many yards of concrete for a 10x20 slab?

2.47 cubic yards at 4 inches, 3.09 cubic yards at 5 inches and 3.7 cubic yards at 6 inches thick.

What is the 10x20 concrete slab cost for concrete only?

At 4 inches, about $294 to $363 at HomeGuide's range and $395 to $481 at ConcreteNetwork.com's, before short-load or delivery fees.

What does a finished 10x20 slab cost?

At $5 to $10 per square foot (HomeGuide) for plain poured concrete, 200 square feet costs $1,000 to $2,000.

How many bags of concrete for a 10x20 slab?

112 bags of 80 lb mix or 149 bags of 60 lb mix at 4 inches thick.

How long are the forms for a 10x20 slab?

The edge of a 10x20 slab is 60 feet long: two sides of 20 feet and two of 10 feet.

How do I check that a 10x20 form is square?

Measure both diagonals. On a 10x20 slab each should be 22.36 feet; if they differ, adjust the form until they match.

How many concrete trucks does a 10x20 slab need?

One. Even at 6 inches the slab needs only 3.7 cubic yards, and truck mixers hold 8 to 12 cubic yards, so expect a short load rather than a full truck.

Sources and references

  1. HomeGuide. How Much Does Concrete Cost Per Yard? (2026). homeguide.com/costs/concrete-prices. Accessed November 16, 2026.
  2. ConcreteNetwork.com. Concrete Price Considerations - Cost of Concrete. www.concretenetwork.com/concrete-prices.html. Accessed November 16, 2026.
  3. The QUIKRETE Companies. QUIKRETE Concrete Mix, Product No. 1101 — Data Sheet. www.quikrete.com/PDFs/DATA_SHEET-Concrete%20Mix%201101.pdf. Accessed November 11, 2026.
  4. Sakrete (CRH). High-Strength Concrete Mix (4,000 PSI) | Sakrete. www.sakrete.com/product/high-strength-concrete-mix/. Accessed November 11, 2026.
  5. National Ready Mixed Concrete Association (NRMCA). CIP 31 — Ordering Ready Mixed Concrete. www.nrmca.org/wp-content/uploads/2021/01/31pr.pdf. Accessed November 12, 2026.

Prices checked November 16, 2026. Prices are reviewed every 90 days; next review due February 14, 2027.

Update history

  • — First published.