Skip to content

20x20 Concrete Slab Cost

20x20 concrete slab cost at 4 in thick: 4.94 yd³ of concrete, $588[src] Sources: HomeGuide to $963[src] Sources: ConcreteNetwork.com at 2026[src] Sources: HomeGuide; ConcreteNetwork.com prices.

What do you know?

Try 5 or 6 in too.

Your supplier's quote.

At published national prices

$588–$963

Cubic yards
4.94 yd³
At HomeGuide range (January 2026)
$588–$726
At ConcreteNetwork.com range (July 2026)
$790–$963

At the published national price ranges, 4.94 cubic yards of concrete costs about $588 to $963. Enter your supplier's price per cubic yard for your own total.

Prices vary by region, season and supplier. Published ranges are for comparison only.

Estimate only — confirm quantities with your supplier before ordering.

More options: fees and extra

Delivery, short-load or Saturday charges.

Added to the amount before pricing.

Set to 20 × 20 ft at 4 in. Type your supplier’s price per cubic yard to price the concrete, and change the thickness to compare.

Key facts

20 × 20 ft slab drawn to scale against the other slab sizes, on a 10 ft grid20 ft20 ftgrid: 10 ft squares
The 20 × 20 ft slab (400 square feet), shaded, with the other slab sizes on this site dashed for comparison. Drawn to scale on a 10 ft grid.

20x20 concrete pad cost

For a 20x20 pad, the finished price and the material price are very different numbers. The tables below show the concrete; the finished price adds forms, labor and finishing.

Concrete, by thickness, at published ready-mix ranges:

Ready-mix concrete cost for a 20 × 20 ft slab at published prices
Thickness (in)Volume (yd³)At HomeGuide range (January 2026)At ConcreteNetwork.com range (July 2026)Short-load charge (January 2026)
4[src] Sources: HomeGuide; ConcreteNetwork.com4.94$588 – $726$790 – $963+ $262
5[src] Sources: HomeGuide; ConcreteNetwork.com6.17$735 – $907$988 – $1,204+ $327
6[src] Sources: HomeGuide; ConcreteNetwork.com7.41$881 – $1,089$1,185 – $1,444+ $393
Concrete only, before tax, labor, forms, base and reinforcement. HomeGuide prices a full truck at about 10 cubic yards and adds a short-load charge below that; ask your supplier where their short load stops.

Finished pad. At $5 to $10 per square foot (HomeGuide, as of January 2026)[src] Source: HomeGuide, the pad costs $2,000[src] Sources: HomeGuide to $4,000[src] Sources: HomeGuide. At $6.50 to $10.50 per square foot (ConcreteNetwork.com, as of July 2026)[src] Source: ConcreteNetwork.com, it costs $2,600[src] Sources: ConcreteNetwork.com to $4,200[src] Sources: ConcreteNetwork.com. ConcreteNetwork.com notes that contractors price by the square foot and ready-mix suppliers by the yard, so compare like with like.

Concrete for a 20x20 slab

The slab is 400 square feet, four times a 10x10:

Concrete for a 20 × 20 ft slab, by thickness
Thickness (in)Volume (ft³)Volume (yd³)With 5% extra (yd³)With 10% extra (yd³)
4[src] Sources: HomeGuide133.34.945.195.43
5[src] Sources: HomeGuide166.76.176.486.79
6[src] Sources: HomeGuide2007.417.788.15
400 ft² × thickness ÷ 12 ÷ 27. HomeGuide suggests adding 5% to 10% for waste and spills.

At 4 inches it needs just under 5 cubic yards; with HomeGuide’s suggested 5% to 10%[src] Sources: HomeGuide extra, about 5.43 cubic yards at the high end. Even at 6 inches the order is below the full truck of about 10 cubic yards[src] Sources: HomeGuide HomeGuide prices, so ask whether a short-load charge applies.

Why ready-mix, not bags, at 20x20

At 4 inches a 20x20 slab is 223 bags[src] Sources: The QUIKRETE Companies; Sakrete (CRH) of 80 lb mix:

Bags of concrete mix for a 20 × 20 ft slab
Thickness (in)40 lb bags60 lb bags80 lb bags
4[src] Sources: The QUIKRETE Companies; Sakrete (CRH)445297223
5[src] Sources: The QUIKRETE Companies; Sakrete (CRH)556371278
6[src] Sources: The QUIKRETE Companies; Sakrete (CRH)667445334
Volume ÷ the yield Quikrete and Sakrete print for each bag, rounded up. No extra included.

Hundreds of bags is not a realistic single pour by hand, and stopping partway risks a joint: HomeGuide warns that “Pouring twice may produce a “cold seam” between the concrete that will cause you to start over.”[src] Sources: HomeGuide One mixer truck carries the whole slab, since mixers hold 8 to 12 cubic yards[src] Sources: National Ready Mixed Concrete Association (NRMCA).

The truck has a time limit too. HomeGuide says that once the concrete is mixed, the driver has about 90 minutes[src] Sources: HomeGuide to deliver the load before it starts to set. Have forms, base and crew ready before the truck is booked.

Base under a 20x20 slab

If the slab sits on a compacted gravel base, an example base 4 inches deep under 400 square feet takes 4.94 cubic yards of gravel before compaction, about 7 tons[src] Sources: Headquarters, Department of the Army; Rockland Manufacturing dry. The gravel calculator does the conversion for any depth, and the gravel cost per ton page has dated prices.

ConcreteNetwork.com lists grading among the costs: the price depends on how much dirt has to be moved, at hourly rates for a tractor and operator.

Reinforcing a 20x20 slab

ConcreteNetwork.com says reinforcement keeps cracks small and lists “Wire mesh, re-bar, plastic mesh, and fiber in the mix”[src] Sources: ConcreteNetwork.com as the common choices. What a given slab needs depends on its use and local rules; check with your building department.

Checking a 20x20 form for square

Equal diagonals mean a square form. On a 20x20 slab each diagonal should read 28.28 feet, about 28 feet 3.4 inches. With 80 feet of form board around the edge, check after staking and again after bracing, since a long side can shift.

Thickness and cost on a 20x20 slab

Every inch of thickness across 400 square feet is 1.23 cubic yards. At published ready-mix ranges that is $147[src] Sources: HomeGuide to $241[src] Sources: ConcreteNetwork.com per inch. An uneven base works the same way: a low spot one inch deep over a quarter of the slab uses about 0.31 cubic yards more than planned, which is one reason to order extra.

Compare slab sizes

Smaller: the 12x12 slab, or the 10x20 slab at half the area. Half again larger: the 20x30 slab. Any shape: the concrete calculator. Per-yard prices with dates: concrete cost per yard.

Frequently asked questions

What is the 20x20 concrete pad cost?

Finished, at $5 to $10 per square foot (HomeGuide) for plain poured concrete, 400 square feet costs $2,000 to $4,000. The concrete alone at 4 inches is $588 to $963.

How many yards of concrete for a 20x20 slab?

4.94 cubic yards at 4 inches, 6.17 cubic yards at 5 inches and 7.41 cubic yards at 6 inches.

What is the cost of a 20 x 20 concrete slab 6 inches thick?

The 7.41 cubic yards of concrete costs $881 to $1,089 at HomeGuide's range and $1,185 to $1,444 at ConcreteNetwork.com's.

Can I pour a 20x20 slab with bags?

It would take 223 bags of 80 lb mix at 4 inches. At that size ready-mix is the practical choice.

How many concrete trucks for a 20x20 slab?

One. Truck mixers hold 8 to 12 cubic yards, according to the National Ready Mixed Concrete Association, and the slab needs 7.41 cubic yards even at 6 inches.

How do I square up forms for a 20x20 slab?

Measure the two diagonals. For a 20x20 slab each is 28.28 feet; adjust the form until both match.

How much more concrete does each inch add to a 20x20 slab?

1.23 cubic yards per inch, or $147 to $241 at published ready-mix ranges.

Sources and references

  1. HomeGuide. How Much Does Concrete Cost Per Yard? (2026). homeguide.com/costs/concrete-prices. Accessed November 16, 2026.
  2. ConcreteNetwork.com. Concrete Price Considerations - Cost of Concrete. www.concretenetwork.com/concrete-prices.html. Accessed November 16, 2026.
  3. The QUIKRETE Companies. QUIKRETE Concrete Mix, Product No. 1101 — Data Sheet. www.quikrete.com/PDFs/DATA_SHEET-Concrete%20Mix%201101.pdf. Accessed November 11, 2026.
  4. Sakrete (CRH). High-Strength Concrete Mix (4,000 PSI) | Sakrete. www.sakrete.com/product/high-strength-concrete-mix/. Accessed November 11, 2026.
  5. National Ready Mixed Concrete Association (NRMCA). CIP 31 — Ordering Ready Mixed Concrete. www.nrmca.org/wp-content/uploads/2021/01/31pr.pdf. Accessed November 12, 2026.
  6. Headquarters, Department of the Army. FM 5-434 Earthmoving Operations, Table 1-2. Material Weight, Swell Percentages, and Load Factors. vulcanhammer.net/wp-content/uploads/2017/01/fm5_434.pdf. Accessed November 11, 2026.
  7. Rockland Manufacturing. Weights of Materials. rocksi.rocklandmfg.com/desktop/assets/Rockland-Weights-of-Materials.pdf. Accessed November 11, 2026.

Prices checked November 16, 2026. Prices are reviewed every 90 days; next review due February 14, 2027.

Update history

  • — First published.